7 Steps to Establish Proper Vegetative Cover

If you need to reseed a disturbed area during an onsite system installation, there are several steps to follow in establishing proper vegetative cover.
7 Steps to Establish Proper Vegetative Cover
A recently installed mound system with established grass cover.

Interested in Trucks?

Get Trucks articles, news and videos right in your inbox! Sign up now.

Trucks + Get Alerts

Whether you are replacing an outdated onsite system or installing a new one, removing vegetation or disturbing the soil increases the chances of soil erosion. There are several steps to follow to establish proper vegetative cover if you’re reseeding the disturbed area. 

As an installer, you should take care of initial seeding, mulching and watering, and the homeowner should be responsible for future seeding and watering. If you need to establish a new vegetative cover over disturbed areas, work directly with the client or landowner to ensure they understand the importance of good vegetative cover. 

Follow these basic steps to guarantee proper vegetative cover for new installations: 

Step 1. Rough grade the area you’ve finished working in, and ensure water will drain from the area instead of pooling at the site. If possible, finish grading with good topsoil. 

Step 2. Apply the proper amount and type of fertilizer (a soil test is recommended so you know how much and what type to apply). If you haven’t done a soil test, a general rule of thumb is a 20-27-5 fertilizer applied at a rate of 5 pounds per 1,000 square feet. 

Step 3. Till fertilizer into the top inch of soil and do a final grading with a rake. You can do a light rolling of the soil, which will show low spots or irregularities in the area. The soil should be firm enough to prevent ruts made by seeding equipment but loose enough that seed can be raked easily into the top quarter inch of soil. 

Step 4. Apply seed. The time of year may dictate the type of seed you want to put down. Cool season grasses such as tall fescue, perennial ryegrass or Kentucky bluegrass will do best when seeded in late August through early October. If you are completing a project and using cool season grass seed and need to get seeding done before those dates, be sure to tell the homeowner that care and watering will need to be done to help ensure a good grass stand. 

A warm season grass is generally established in late spring or early summer. Check with the homeowner or a local lawn care professional for types of warm season grasses. 

Follow the seeding rate as listed on the seed bag, but here’s a general rule of thumb for spring and fall planting:

Step 5. Rake or drag to cover seed lightly. If the soil grading was done properly, the soil bed should work well and allow the seed to be lightly covered. 

Step 6. Mulch with straw. Light straw mulch should sufficiently reduce any potential soil erosion until the grass gets established. One bale of straw should cover approximately 1,000 square feet. This will shade the ground and prevent rapid drying of the soil surface. 

Step 7. Water the seed. Moisten the seedbed — do not saturate — to a depth of 1 to 2 inches. For continued ground cover growth, ensure the homeowner waters the area up to four times a day with light applications of 1/8 to 1/4 inch of water. This should continue until they see 2-inch-tall seedlings. 

These basic steps in addition to recognizing the issues created with warm temperatures and rainfall events will ensure successful vegetative cover. 

There are also several habits you should avoid during onsite installations and vegetative cover plantings. Don’t plant trees within 20 feet of septic tanks or lateral lines.

Trees can produce roots four times the width of the tree canopy so maintaining a proper distance from trees will prevent damage to septic tanks and lateral lines. If there is a lagoon instead of lateral lines, trees should be a minimum of 30 feet from the lagoon. This allows for proper lagoon function, and it keeps most tree debris from entering the lagoon. 

About the Author
Bob Broz is water quality specialist with the University of Missouri Extension. He teaches classes on soil percolation for onsite installers and developed a class for real estate professionals about understanding onsite systems. He has developed a class for homeowners on the care and maintenance of onsite systems. Readers are welcome to submit questions or article suggestions to Bob. Write to kim.peterson@colepublishing.com.

What tips or tricks do you have for establishing proper vegetative cover during onsite installations? Post a comment below.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.