BLOWERS
JUROP HELIX
HELIX blowers incorporate the third generation of JUROP helical tri-lobes with air injection porting designs and internal paths to decrease noise and heat. They eliminate the requirement to enclose the blower in a noise abatement box. The frame rail-mounted HELIX 300 system delivers 1,089 cfm and 15 psi at 1,400 rpm input. The industrial-duty integrated gearbox eliminates drive-coupling failures, according to the maker. The system includes electronic optical gearbox oil level sensors and an integrated thermostat providing safety for the system and team. www.jurop.it
National Vacuum Equipment Challenger 4310
The Challenger 4310 from National Vacuum Equipment is a quiet, environmentally friendly machine that offers a ballast cooling and porting design to allow for continuous pumping at full vacuum without overheating. It is capable of airflow to 940 cfm at 4,500 rpm with no oil mess. It is a tri-lobe design with precision machining, and includes a ballast port manifold that cools the blower through air injection. It provides a range of airflow options, with performance available to accommodate needed power. It includes 4-inch hose connections with barbed adjustable porting for intake and exhaust. An integrated final filter provides easy access for cleaning. The blower also includes a four-way pressure/vacuum changeover valve. 800-253-5500; www.natvac.com
COMMUNICATION EQUIPMENT
ProCom Headsets ATLAS PRO
The ATLAS PRO from ProCom Headsets is an all-in-one industrial-grade communication headset designed to withstand tough working environments and provide seamless, safe communication with everyone on the job. Crews who already utilize two-way radio systems can integrate their existing system into the headset to expand communication throughout the entire job site. The lightweight headset offers more than 13 hours of battery life. It uses ACS high-level encrypted talk channels to ensure interference will not be an issue and all conversations will be private. It is open-mic, enabling the crew to minimize pressing buttons. 727-692-8700; www.procomheadsets.com
GROUND COVER MAT
BAM! Ground Protection Mats
BAM! Ground Protection Mats are made from four-season, durable high-vis green high molecular weight polyethylene material with a built-in UV protector to guard against fading and cracking. The mats are 3/8-inch thick and rated at 160,000 pounds with pressure ratings of 373 pounds per square inch, and 53,700 pounds per square foot. They have a temperature rating of -103 degrees F to 258 degrees F. The 4-by-8-foot sheets weigh 56 pounds and come with eight large hand holes for easy handling, even with gloves. A dual-sided tread pattern provides safe traction for equipment and pedestrians. Mats don’t absorb moisture and chemicals and can be hosed off. 262-877-4700; www.bamgroundpro.com
HOSE REELS
COXREELS V-100 Series
The COXREELS V-100 Series product line has been expanded with the new 1 1/4-inch vacuum hose reel V-112-735 without hose and the V-112H-735 with hose. The new model has a smaller frame size featuring 12-inch-diameter discs instead of the original 17-inch-diameter discs and is designed for use with 35 feet of 1 1/4-inch vacuum hose. The outlet connecting to the hose remains 1 1/2 inches and the 1 1/4-inch hose comes equipped with 1 1/2-inch slip cuffs on both ends for maximum flow. The new swivel design allows connection of multiple hose sizes by using the inside and the outside of the housing, but a greater gradual taper has increased the amount of compatible inlet hose cuffs. 800-269-7335; www.coxreels.com
Hannay Reels VAC Series
The Hannay VAC Series is a heavy-duty, single-wrap reel engineered to store large-diameter vacuum and suction hose up to 4 inches. With a narrow footprint, this storage reel can be mounted alongside the tank or between the cab and tank, providing access from either side of the vehicle. Available in either manual or power rewind, this reel provides effortless and fast unwind and rewind operation of the hose while preventing kinks and damage from dragging. 877-467-3357; www.hannay.com
HYDROEXCAVATION TOOLS
Dynablast HV590FLS-12VRED
The HV590FLS-12VRED hydrovac water heater from Dynablast produces 590,000 Btus with an output temperature of 175 degrees F at 7 gpm. An optional electronic 12-volt thermostat can hold a more precise water temperature. The unit is suitable for colder climates and improves digging in clay-filled areas, according to the maker. It enables fuel savings of 3/4 gph and a weight reduction of 250 pounds over the current 690,000 Btu model. It comes with extract transform load certification for safety, which also includes certification on the coil for higher efficiency and heat transfer, stainless steel target plate for increased coil life and serviceability with momentary override control. 905-867-4642; www.dynablast.ca
Easy-Kleen Pressure Systems hot-water heaters
Oil-fired hot-water heaters from Easy-Kleen Pressure Systems are install-ready for vacuum and hydrovac trucks. These rugged, heavy-gauge frames offer durability even in severe road and weather conditions, according to the maker. A full range of heater options is available including dry steam, redundancy packages, schedule 80 and 160 stainless steel or A53 boiler pipe, and fine-tuned temperature and flow control systems. Their coils are manufactured in-house. (Canadian Registration Number boiler approved coils now available). These heaters can be mounted in a cabinet or supplied as a completed cabinet unit. 800-315-5533; www.easykleen.com
Pressure Lift HydraBore
The HydraBore equipment attachment from Pressure Lift fits on the end of any vacuum hose used for hydroexcavation. Place the stinger on the far end of the tool, then hook the HydraBore to the end of the snorkel. Connect the air supply and high pressure water supply systems, turning the air on first, then the water supply, open the vacuum system and begin hydroexcavating. Contractors no longer need additional manpower holding a lance-powered high-pressure water supply. It also removes the need to wear a rain suit to remain clean as the user begins every job from several feet away using the lanyard or from the safety of the side of the rig at the other controls. Once hydroexcavation begins, the user can control the boom in an up-and-down motion, then when the HydraBore becomes submerged, can excavate faster and go deeper than before, reducing wear and tear on vacuum equipment. 866-504-6596; www.pressurelift.com
RNV Hydrovac2
The RNV Hydrovac2 can be placed on an RNV-approved 6-cubic-foot steel construction-grade wheelbarrow to create a portable hydrovac. It can vacuum down vertically to 12 feet to convey effluent sludge, sand and small aggregate. It can be combined with a pressure washer or air spade for another excavation solution. The unit weighs 42 pounds, requires a 120-volt AC, 15-amp power outlet and will run on a 2,200-watt generator or inverter. 607-786-2139; www.rnvac.com
TRUVAC DigRight Technology
TRUVAC’s DigRight Technology offers a sophisticated variable water flow pump, designed to precisely tailor the water flow to the specific requirements of the nozzle in use. The pump operates within strictly defined parameters for optimal performance without risk of damage to the nozzle, surrounding utilities or the pump mechanism, according to the maker. Should water pressure inadvertently exceed predetermined boundaries, a relief valve activates for safety. The system permits programming of three distinct pressure upper limits, which operators can modify on the fly with a handheld wireless controller, eliminating concerns over accidental limit breaches. It safeguards against the accidental disruption of underground utilities and ensures operator safety. The automation of water flow adjustments according to nozzle size is designed to provide smoother and more effective hydroexcavation. 815-672-3171; www.truvac.com
HYDROEXCAVATION UNITS
Ditch Witch Warlock W12
The Warlock W12 from Ditch Witch is a PTO-driven vacuum excavator with dual 600-gallon saddle tanks and a 12-cubic-yard debris tank. It is available with a 5,000 cfm blower and 27 inches Hg of vacuum power. 580-336-4402; www.ditchwitch.com
GapVax VHX Series
The GapVax VHX Series hydrovac is designed for optimal weight distribution, improved safety features and improved performance. The debris body is 7.5 cubic yards, offering a 15,000-pound payload. It has a profile of 12 feet, 2 inches) for all-around hydroexcavation projects. The vacuum system with single mode wet/dry filtration is quiet, reliable and simple, according to the maker. It includes a 4,000-cfm positive displacement blower, 600 hp transfer case with air-shift engagement and ultra-quiet air injection, and discharge silencers. This filtration design includes a top-loading debris tank, 14-inch stainless steel float-ball shut-off, efficient centrifugal cyclone separators and long-lasting filter bags. It is equipped with a 12 gpm, 3,000 psi water system with optional 200 cfm air compressor system. A full-tilting debris body, more than 45-degree dump angle and full-opening tailgate promote fast unloading and easy cleanout. The 8-inch telescoping VHX boom offers a 22-foot reach with 15-degree downward pivot. 888-442-7829; www.gapvax.com
Guzzler Guzzcavator
The Guzzler Guzzcavator combines the capabilities of an industrial vacuum loader and a hydroexcavator. The multipurpose machine boasts powerful hydroexcavation with extended operation time, a multiflow water system for precise control, and a telescoping boom for greater reach. It’s easy to operate and maintain, according to the maker. 815-672-3171; www.guzzler.com
HotJet USA Vac’n Jet Series
The HotJet USA Vac’n Jet Series of vacuum trailer jetters are compact and engineered to haul equipment and the spoils load, perform hydroexcavation, and clean valve boxes, storm drains and drain/sewer lines. They feature hot and/or cold water operation with a choice of engines ranging from 23 to 70 hp and gas or diesel. They are equipped with premium triplex pumps, a 500-gallon spoils tank, up to 440-gallon water tanks, Gardner/Denver vac/blowers, a 4-ton hydraulic dump and a dual filter centri-clean filter system. They can also be custom engineered to meet specifications. 800-624-8186; www.hotjetusa.com
Rival Hydrovac T7 Tandem and T10
The T7 Tandem from Rival Hydrovac was designed primarily to be loaded with debris and drive within legislated road limits carrying most types of debris. The unit comes standard with a scale that reads real-time weights in the cab and on the wireless remote. The T10 is built with the same features and operating system, but with larger capacities and components. It is for both utility and industrial work and is available in three chassis layouts to meet weight restrictions in a given area. An air compressor option allows for excavating with air when required, while a truck-mounted coring system allows for removal of hard surfaces prior to nondestructive excavating. 403-550-7997; www.rivalhydrovac.com
Super Products Mud Dog 700
Mud Dog 700 vacuum excavators from Super Products are designed to meet the challenges of compact, urban projects as well as large-scale excavation projects. They offer a compact footprint while maximizing payload and maintaining the power and precision that larger units offer. The unit features a 7-yard debris body and 600-gallon water tank. It comes standard as a dump body with an electric vibrator offering a 50-degree dump angle with the capability of dumping into a 48-inch container. Additionally, it is equipped with a rear-mounted, extendable, 8-inch-diameter boom that reaches 18 feet, has 270-degree rotation and pivots 10 degrees downward, which minimizes job site restoration and eliminates traffic congestion near roads. 800-837-9711; www.superproducts.com
Transway Systems Hydrovac
Transway Systems builds customized Hydrovac units to meet specific requirements. Integrating a high-volume water pump and a flushing system into the unit enables it to excavate and dig as well as flush and clean affected sewer pipes. It produces 80 gpm of flow and 2,500 psi of pressure flowing through a 1-inch thermoplastic hose equipped with a specialty flushing nozzle to flush away compacted sediment and debris, leaving clean pipes with no blockages or buildups. 800-263-4508; www.transwaysystems.com
Vac-Con X-Cavator
The X-Cavator hydrovac from Vac-Con includes a cold-weather enclosure for the water systems and control panel as well as an interior area for operator seating and workspace. Unit filtration is based on the Titan combination machine, with a single-cyclone design and final cartridge-style filter. The redesigned boom is lightweight and flexible, rotating 310 degrees around the unit and moving plus 45 degrees and minus 22 degrees vertically. The durable rubber hose material can withstand harsh environments, according to the maker, and has a reach of 26 feet. 904-284-4200; www.vac-con.com
INDUSTRIAL VACUUM TRUCKS
Imperial Industries TMV4000a
The TMV4000a from Imperial Industries is designed for efficiency and operator comfort, according to the maker. The tank package can be installed on a variety of chassis brands (International, Freightliner, Peterbilt, Kenworth) along with vacuum pump and blower options from NVE and Masport. This setup comes standard with a vacuum pump or blower of the end user’s choice, aluminum toolbox, work lights and sight glasses. Options include heated jackets, level indicators, front intakes, backup cameras, Omega hose reels, jetters, water tanks, pintle plates and hitches. 800-558-2945; www.imperialind.com
JET/VAC COMBO UNIT
Vactor 2100i catch basin
The Vactor 2100i catch basin provides the advantages of the traditional 2100i, but with an improved air-routing system that provides an efficient airflow path for both the single-stage and dual-stage fan or a positive-displacement blower configuration for maximum productivity. Ergonomic controls make it easy to operate and maintain. A hydroexcavation package can be selected. Water system and water heater options are available to enhance the hydroexcavation performance. Features include IntuiTouch one-touch controls, a Jet Rodder water pump, a high-strength aluminum water tank, a quieter engine design and high ground clearance. Options include water heaters and cold-weather features. 815-672-3171; www.vactor.com
VACUUM PUMPS
Fruitland 1400
The Fruitland 1400 is the company’s largest, most powerful rotary vane pump. It is fan-cooled for increased free airflow over its predecessor, the 1200, producing 910 cfm. It is lighter and significantly quieter than the 1200, and features air injection for continuous operation. It includes improved designs of both the integrated oil reservoir and filter pod, making it suitable for long, heavy and deep pulls. 800-663-9003; www.fruitlandmanufacturing.com
Presvac Systems PV750
The Presvac Systems PV750 rotary vane pump is designed for continuous full-vacuum operation in extreme conditions. It offers 400 cfm at free air, 350 cfm at 15 inches Hg, a maximum vacuum of 27 inches Hg and maximum pressure of 35 psi. Dual fans and twin ballast ports are designed to efficiently cool the pump. The solid housing with deep cooling ribs allows greater heat transfer from the vacuum chamber. Aluminum fans and shrouding work like a heat exchanger. Multiple manifold and drive options are available for truck, trailer or stationary applications. 800-387-7763; www.presvac.com
Wallenstein Vacuum 753 Series
The 753 Series vacuum pump from Wallenstein Vacuum is designed for long service life, incorporating wide vanes that allow up to an inch of wear. It provides 422 cfm airflow at 1,200 rpm and vacuum levels up to 28 inches Hg. Options include air-, liquid- or dual-cooling systems where air injection is combined with liquid cooling. A pump-flushing port is included on the top valve for convenient maintenance. The quick-access housing end plate allows for easy internal inspection with no bearings to pull. Oil lubrication is via a mechanical piston pump driven by shaft rotation or available with a sight-feed valve oil regulator system using vacuum/pressure to draw oil with no moving parts. 800-801-6663; www.wallenstein.com
Westmoor Conde PowerPaks
Westmoor Conde PowerPaks are preassembled gasoline or diesel-powered vacuum pump units. They are easy to install, according to the maker, and include a heavy-duty steel base with aluminum diamond plate trim and belt guard. Rigid assembly is designed to minimize vibration and maximize power. They are available with either vacuum only or vacuum/pressure pumps. A range of cfm options matches the PowerPak to the tank size and application. Units are powered by Honda GX Commercial Series gasoline engines or Hatz industrial air-cooled diesel engines. Units can be transferred to another tank system when needed. 800-367-0972; www.westmoorltd.co
WATER PUMPS
Cat Pumps Model 7CP6165CSG1
The Cat Pumps Model 7CP6165CSG1 offers a compact footprint, longevity and performance rating of 8 gpm at 3,500 psi, according to the maker. It converts to a jetting pump by adding a pulsator assembly, which eliminates the danger of deadheading the pump, prolonging the life of the seals and reducing unplanned downtime. A convenient handle allows for a quick changeover from cleaning to jetting modes. It uses an industrial-duty gearbox that attaches directly to 1- or 1 1/8-inch 3,265 rpm gas engines. Its gearbox features hardened steel helical gears for smooth, quiet operation. The sealed housing provides independent gear lubrication. 763-780-5440; www.catpumps.com
