High-Pressure Nozzles - StoneAge WGR Switcher

The WGR Switcher from StoneAge provides the ability to run a single sewer jetting tool in either pulling or cleaning mode without removing the nozzle from the pipe. When the pump is idled down and brought back to pressure, the tool will switch the water flow between two patterns of jets. This allows the tool to switch between pulling and cleaning, reducing the time and water usage required to make multiple runs with different nozzles. The pulling/flushing jet pattern directs maximum power to the rear jets to pull or flush debris backward. The cleaning/descaling jet pattern directs power to the side jets for cleaning deposits and cutting roots. The two-tools-in-one unit navigates pipes 8 to 36 inches in diameter and handles pressures up to 5,000 psi at up to 100 gpm. 970-259-2869; www.stoneagetools.com.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.