Blowers

National Vacuum Equipment Challenger 1600

The Challenger 1600 from National Vacuum Equipment is a 1,600 cfm tri-lobe blower designed for continuous duty at maximum vacuum. Rotors are designed to improve vacuum efficiency and reduce mechanical noise. The blower has a ballast air-cooling design and typical maximum vacuum of 27 inches Hg. 800-253-5500; www.natvac.com

Communication Equipment

CrewPlex

CrewPlex is a hands-free communication solution to help crews overcome the challenges of continuous communication in environments where noise, distance and task complexity can affect safety and productivity. It enables connectivity with crew, supervisors and support personnel using one system. Users can speak and listen in real-time without delay, voice triggering or pushing a button. Clear audio quality provides better communication in all environments, especially on sites where noise levels can exceed 100 dB. Available connectivity to two-way radio systems keeps work groups in touch with a supervisor and extends communication. 334-321-1400; www.crewplex.com

ProCom Headsets ATLAS PRO

The ATLAS PRO from ProCom Headsets is an all-in-one industrial-grade communication headset designed to withstand tough working environments and provide seamless, safe communication with everyone on the job. Crews who already utilize two-way radio systems can also integrate their existing system into the headset to expand communication throughout the entire job site. The lightweight headset offers more than 13 hours of battery life to function throughout the workday. It uses ACS high-level encrypted talk channels to ensure interference will not be an issue and all conversations will be private. It is completely open-mic, enabling the crew to minimize pressing buttons and maximize time spent working. 727-692-8700; www.procomheadsets.com

Hoses

Kuriyama of America Alfagomma T704HA Series THE BOOMER

Corrugated Alfagomma T704HA Series THE BOOMER industrial sewer vacuum hose from Kuriyama of America is made with a 1/4-inch-thick red gum rubber tube designed for wet or dry applications where severe abrasion is a factor. The corrugated black conductive styrene-butadiene/natural rubber blend cover provides abrasion and ozone resistance. The hose can be grounded. All sizes are rated to full vacuum and a pounds-per-square-inch safety factor of 3-1 for 2- to 8-inch hose and 2.5-1 for 10-inch hose. The hose remains flexible in temperatures from 40 degrees below zero to 212 degrees F. It is available with soft-cuffed ends for easy installation and clamping. 847-755-0360; www.kuriyama.com

Hot Water Boilers

Dynablast CAB420FLS-12V

The Dynablast CAB420FLS-12V water heater produces 420,000 Btu with an output temperature of 175 degrees F at 5 gpm to work in colder climates and for improved digging in clay-filled areas. All models come with Edison Testing Laboratories certification for safety, which also includes certification on the coil for higher efficiency and heat transfer, stainless steel target plate for increased coil life and designed with serviceability in mind with momentary override control. Its full cabinet design and 24-by-24-inch footprint are compatible with compact installations. 905-867-4642; www.dynablast.ca

Hydroexcavation Equipment

Ditch Witch Warlock W12

The Warlock W12 from Ditch Witch is a PTO-driven vacuum excavator offering dual 600-gallon saddle tanks and a 12-cubic-yard debris tank. It is available with a 5,000 cfm blower and 27 inches Hg of vacuum power. 580-336-4402; www.ditchwitch.com

GapVax HV33

Designed to safely transport water and debris in urban areas, the GapVax HV33 is 30 feet long overall on a medium-duty chassis and includes a 600-gallon water tank, 6-cubic-yard debris body, 6- or 8-inch top-mounted telescoping boom with a 14- to 17.5-foot reach, 4,000 cfm power and an inverted, full-opening tailgate. 888-442-7829; www.gapvax.com

Hi-Vac X-13

Contractors, municipalities and utility service providers may utilize Hi-Vac X-13 hydroexcavators to safely and efficiently trench for new sewer and wastewater lines with minimal disturbance to surrounding areas. They combine precise hydroexcavating power with low-maintenance components designed to help minimize downtime, and simple, intuitive controls provide quick access to all critical systems. A 13-cubic-yard debris tank offers up to 24,500-pound payload capacity and 1,140-gallon freshwater capacity. Power is provided by a 5,800 cfm, 27-inch Hg high-performance blower and a run-dry water pump that delivers 20 gpm at 2,500 psi. Other features include a 360-degree, top-mounted boom and a heavy-duty hydraulic vibrator for efficient unloading of the debris body. 800-752-2400; www.x-vac.com

HotJet USA Vac’n Jet Series

The HotJet USA Vac’n Jet Series of vacuum trailer jetters are compact and engineered to haul equipment and the spoils load, perform hydroexcavation and clean valve boxes, storm drains and drain/sewer lines. They feature hot and/or cold water operation with a choice of gas or diesel engine options ranging from 23 to 70 hp. They are equipped with premium triplex pumps, a 500-gallon spoils tank, up to 440-gallon water tanks, Gardner Denver vac/blowers, a 4-ton hydraulic dump and a dual filter centri-clean filter system. They can also be custom engineered and designed to meet specifications. 800-624-8186; www.hotjetusa.com

Imperial Industries Hydro 3600 Hybrid Excavator

The Hydro 3600 Hybrid Excavator from Imperial Industries is short and compact for maneuverability in tight spaces. It is designed to be user-friendly and efficient and operated by a single worker. It includes a 3,600-gallon hauling capacity (customizable sizes available), optional water capacity, code and noncode availability, a three-stage lift hoist with built-in vibrator and full-opening rear door, 20 gpm jetter up to 4,000 psi (adjustable), a National Vacuum Equipment 1600 blower and a moisture trap and grit ridder. Options include a 16-function remote control for boom operation, jetter, blower and vacuum. 800-558-2945; www.imperialind.com

Pressure Lift HydraBore

The HydraBore equipment attachment from Pressure Lift fits on the end of any vacuum hose for a simple, cost effective approach to hydroexcavation. It breaks up soil, removing it quickly to reduce labor requirements to a one-person operator, keep projects clean and improve safety. The tool is designed to reduce operator downtime, changing clothes when finished, and requires fewer workers when pumping deeper and faster. It can also be used with smaller vacuums. 866-504-6596; www.pressurelift.com

Rival Hydrovac T7 Tandem and T10

The T7 Tandem from Rival Hydrovac was designed primarily to be loaded with debris and drive within legislated road limits with most types of debris on board. The unit comes standard with a scale that reads real-time weights in the cab and on the wireless remote. The T10 is built with the same features and operating system, but with larger capacities and components. It is for both utility and industrial work. It is available in three chassis layouts to meet weight restrictions in a given area. An air compressor option allows for excavating with air when required, while a truck-mounted coring system allows for removal of hard surfaces prior to nondestructive excavating. 403-550-7997; www.rivalhydrovac.com

RNV Hydrovac2

The RNV Hydrovac2 can be placed on an RNV-approved 6-cubic-foot steel construction-grade wheelbarrow to create a portable hydrovac. It can vacuum down vertically to 12 feet to convey effluent sludge, sand and small aggregate. It can be combined with a pressure washer or air spade for another excavation solution. The unit weighs 42 pounds, requires a 120-vac 15-amp power outlet and will run on a 2,200-watt generator or inverter. 607-786-2139; www.rnvac.com

Super Products Mud Dog 700

Mud Dog 700 vacuum excavators from Super Products are designed to meet the challenges of compact, urban projects as well as large-scale excavation projects. The unit features a 7-yard debris body and 600-gallon water tank. This model comes standard as a dumpbody with an electric vibrator offering a 50-degree dump angle with the capability of dumping into a 48-inch container. Additionally, it is equipped with a rear-mounted, extendable, 8-inch-diameter boom that reaches 18 feet, has 270-degree rotation and pivots 10 degrees downward to minimize job site restoration and eliminate traffic congestion near roads. 800-837-9711; www.superproducts.com

Transway Systems Terra-Vex HV65

The Transway Systems Terra-Vex HV65 is a single-operator unit capable of performing all functions from a single remote control. The blower, water tank, boiler, jetter system and wands are housed in an insulated, sound-dampening enclosure with thermostat-controlled heater. It includes large, winter-friendly roll-up doors with ample storage. An onboard air compressor is available. 800-263-4508; www.transwaysystems.com

TRUVAC Paradigm

The Paradigm sub-compact vacuum excavator from TRUVAC revolutionizes safe and efficient digging around utilities. Its compact, low-profile and tough non-CDL design allows for easy maneuverability, making it suitable for any excavation job. With its quick setup design, operators can begin operations with just a flip of a switch using the Park-N-DigT feature. With parts and service centers nationwide, dedicated training, and rapid-response time, the company ensures that their vacuum excavators are always up and running. 815-672-3171; www.truvac.com

Vac-Con Mudslinger MS800

The Mudslinger MS800 trailer-mounted hydrovac from Vac-Con is designed to provide the same power, suction and capacity of a truck hydroexcavator on a portable trailer. It includes the choice of Tier 4 diesel or gas engine options providing up to 1,190 cfm and 16 inches Hg with a PD blower and 325 gallons of water. It has an 845-gallon debris tank and a 9-foot boom with 24 inches of hydraulic extension providing a full range of motion. It is designed to be a standalone unit but can also provide support to construction, horizontal directional drilling and public utility fleets. A variety of applications include daylighting, potholing, culvert and manhole cleaning and utility locating. 904-284-4200; www.vac-con.com

Jet/Vac Combo Units

Bucher Municipal North America FlexLine

FlexLine C120 and C60 combination sewer cleaners from Bucher Municipal North America are used for preventive cleaning, emergency cleaning of mains, septic, collection tanks and hydroexcavation. They offer 8- and 15-cubic-yard capacities, 7.2 and 14.5 psi, a jetting hose reel with more than 492 feet of capacity, a 5-inch suction hose with 7-foot extension, a hydraulic end cover that opens upward to minimize obstructions on roads and sidewalks, two control panels placed for easy operation, and a 5,100 psi at 5 gpm hydroexcavation pump. 704-658-1333; www.buchermunicipal.com

Nozzles

Hydra-Flex Machete

The Machete from Hydra-Flex is a linear oscillating nozzle built to take on hydroexcavation challenges in compact soils. It is ergonomic with the power to reach greater depths without the operator needing to bend over. The spray motion eliminates extra manual movements by the operator. It reduces the risk of undermining and can take on bell holing, sloping, trenching and finishing applications. It blasts a 0-degree stream of water that oscillates to create a 15-degree wedge. As water flows, the rotor spins, forcing the rocker assembly to move back and forth, creating the oscillation movement. This combination provides the safety of a rotating nozzle with the force of a straight-line tip, making it a smaller nozzle with the same impact as nozzles with higher gpms. 952-808-3640; www.hydraflexinc.com

Vacuum Pumps

Fruitland 870 Series

Fruitland’s 870 Series pump allows vacuum levels of 28.5 inches Hg and continuous vacuum of 27 inches Hg. It is capable of 30 psi pressure for offloading. Oil consumption is 1 gallon for 18 hours of operation to reduce environmental impact. Locally sourced, nonproprietary oil may be used. The pump delivers 510 cfm (free air) through 4-inch porting. 905-662-6552; www.fruitlandmanufacturing.com

Presvac Systems PV750

The Presvac Systems PV750 rotary vane pump is designed for continuous full-vacuum operation in extreme conditions. It offers 400 cfm at free air, 350 cfm at 15 inches Hg, a maximum vacuum of 27 inches Hg and maximum pressure of 35 psi. Dual fans and twin ballast ports are designed to efficiently cool the pump. The solid housing with deep cooling ribs allows greater heat transfer from the vacuum chamber. Aluminum fans and shrouding work like a heat exchanger. Multiple manifold and drive options are available for truck, trailer or stationary applications. 800-387-7763; www.presvac.com

Samson Pumps Truck Master 3 Future Series

The Truck Master 3 Future Series liquid ring vacuum pump from Samson Pumps has a capacity up to 412 cfm and generates 27.1 Hg in vacuum, along with air speed approximately 125 feet per second in a 3-inch suction hose. It weighs in at 216 pounds. It provides a combination of ideal water handling capabilities, a nonclogging design, self-priming capability, high suction power, light weight, durability, low maintenance and silent operation. www.samson-pumps.com

Wallenstein Vacuum 753 Series

The 753 Series vacuum pump from Wallenstein Vacuum is designed for longer service life, incorporating wide vanes that allow up to an inch of wear. It provides 422 cfm airflow at 1,200 rpm and vacuum levels up to 28 inches Hg. Options include air-, liquid- or dual-cooling systems where air injection is combined with liquid cooling. A pump-flushing port is included on the top valve for convenient maintenance. The quick-access housing end plate allows for easy internal inspection with no bearings to pull. Oil lubrication is via a mechanical piston pump driven by shaft rotation or available with a sight-feed valve oil regulator system using vacuum/pressure to draw oil with no moving parts. 800-801-6663; www.wallenstein.com

Westmoor Conde PowerPaks

Westmoor Conde PowerPaks are preassembled gasoline or diesel-powered vacuum pump units. They are easy to install, according to the maker, and include a heavy-duty steel base with aluminum diamond plate trim and belt guard. Rigid assembly is designed to ensure minimum vibration and maximum power. They are available with either vacuum only or vacuum/pressure pumps. A range of cfm options ensure the PowerPak is matched to the tank size and application. Units are powered with optional Honda GX Commercial Series gasoline engines or Hatz industrial air-cooled diesel engines. Units can be easily transferred to another tank system when needed. 800-367-0972; www.westmoorltd.co

Vacuum Trucks/Trailers

Guzzler Liquid Ring (LR)

The Guzzler Liquid Ring (LR) is a powerful and efficient industrial vacuum truck that is designed to handle both solids and liquids. With its high vacuum power and four-stage filtration system, it stands out when it comes to uptime and productivity. Its quiet and virtually maintenance-free Liquid Ring Pump operates at a noise level of 10-12 dBA, making it quieter than typical industrial vacuum loaders and ideal for use in noise-sensitive environments. It is equipped with advanced safety features such as a tailgate safety pin, backup alarm, and alarms for low and high-water levels, ensuring safe operation at all times. It is not only easy to operate but also easy to maintain. Its intuitive and simple controls make it user-friendly, while its original single-mode system simplifies operation for maximum productivity on tough jobs. 815-672-3171; www.guzzler.com

Water Pumps

Cat Pumps Model 1560

With a performance rating of 9 gpm at 4,000 psi, the Cat Pumps Model 1560 offers a combination of high performance, compact footprint and longevity to help jetters cut through challenging jobs. It converts to a jetting pump by adding a pulsator assembly, eliminating the danger of deadheading the pump, prolonging the life of the seals and reducing unplanned downtime. A convenient handle allows for a quick changeover from cleaning to jetting modes. The pump can be belt-driven with a 12.4-inch pitch diameter dual-groove B-belt clutch, providing the on-demand ability to engage or disengage the pump, reducing runtime, saving energy and increasing pump life. Or, with a bell housing, an SAE hydraulic motor can be conveniently mounted to drive the pump. 763-780-5440; www.catpumps.com