Abernethy Welding & Repair Inc.

Tank sizes from Abernethy Welding & Repair Inc. range from 500 to 5,000 gallons in a choice of new and used truck chassis. Standard tank features include 1/4-inch steel shell with flanged and dished heads, double-welded seams – inside and out, two full 1/4-inch steel plate baffles and 1/4-inch steel checker plate decking. Other features include 24-inch manholes top and rear with 1/2-inch rubber seal and safety latch cover. Each tank is sandblasted inside and out, primed and painted with a polyurethane finish and epoxy coat inside. Tanks have 5-inch removable sight glasses, two tool boxes (12 by 66 by 18 inches and 12 by 36 by 18 inches), full-length hose rack, front and rear pumping, air-cooled pumps, two 4-inch quick-opening valves, two-gear power takeoff, vacuum- and pressure-relief valves, primary and secondary shutoffs. Options include liquid-cooled pumps, custom-sized tool boxes, trailer hitches, freshwater tanks and slurry spreaders. 800/545-0324; www.abernethywelding.com.

 

Advance Pump & Equipment Inc.

The 4,200-gallon, two-compartment, customizable aluminum industrial vacuum tank from Advance Pump & Equipment Inc. has a full-open rear door with adjustable hinge point, telescoping hoist and optional hydraulic tank vibrator. Features include 4-inch SC80 load line with 4-inch flange and standpipe/deflector, rear 6-inch discharge and 6-inch flange mounted head, three 5-inch removable sight glasses, anti-surge baffles, 20-inch top manway, and full-length, polished aluminum hose trays. Mounted on a Peterbilt tri-axle chassis, the tank has a Demag Wittig RFW200 pump and JT1030 jetting system. Other features include rear hose hooks, driver-side mounted three-step ladder, steel rear bumper wrapped in diamond plate and right-side-mounted, air-operated Chelsea PTO with in-cab control. 877/557-7867; www.advancepump.com.

 

Allied Tank Co.

The 5,200-gallon waste/300-gallon freshwater, dual-compartment (can be converted to single-compartment 5,500-gallon), aluminum tank from Allied Tank Co. has an 819-cfm Model 4310 air-cooled NVE blower, three sight glasses, all-aluminum full-length hose trays, manways top and rear with access ladder and 65-inch aluminum two-door cabinet. Mounted on a 2011 Kenworth T series tri-axle chassis with pre-emission mandate engine, the truck is powered by a 525-hp Cummins diesel that delivers 1,650 ft-lbs of torque. It has a 20,000-pound front axle and 46,000-pound rear axle with lifting rear to shorten the wheelbase and turning radius. Coupled with an Allison automatic transmission, the truck has upgraded premium interior, heated mirrors, electric hot-shift PTO, chrome bumper, engine compression brake, air-ride suspension and aluminum wheels. 800/355-1300; www.alliedtank.com.

 

Badger Truck Center Inc.

The 3,600-gallon Badger Vacs Progress stainless steel Weight Saver tank and truck from Badger Truck Center Inc. weigh a total of 21,460 pounds. Designed for service life over multiple chassis, features include 7-gauge, 304L stainless steel No. 4 finish barrel and 5454 polished aluminum hose trays. Other features include continuous-weld, flow-through, easy-clean dished baffles with 20-inch-high lower openings and 2-inch diameter center holes with rear sump-style dump to help eliminate the need to enter the tank to remove waste. 800/537-7183; www.badgertruck.com.

 

Camex Equipment Sales & Rentals Inc.

The Articulated Cat 740-powered, all-terrain vacuum truck from Camex Equipment Sales & Rentals Inc. is used for mining operations in Northern Alberta, Canada, to remove excess water from runoff and water buildup on site. The truck has 66 x 43-25 floater tires for extreme road and off-road conditions. The 116-barrel tank has a suction boom mounted on the rear door for better access and functionality. Features include Betts suction valves (air open/spring closed) with lockable cam-lock fittings and 12-inch discharge valve. All suction and discharge valves are water jacketed for heat. The truck has a self-contained, silent-flow Hibon VTB 820 (1,400 cfm) hydraulic vacuum pump, fully opening hydraulic rear door, 35-ton, three-stage single-acting cylinder. The vacuum pump, rear door, rear boom dump gate, hoist and vibrator are all controlled inside the cab. Safety features include wide-angle camera mounted on the rear door, extra-wide, full-length checker-plate fenders with handrails and safety post for the hoist and rear door. 780/955-2770; www.camex.com.

 

Crescent Tank Mfg.

The Model 1100 flat tank portable restroom service vehicle from Crescent Tank Mfg. can carry up to 10 units, reducing the need for a separate pickup and delivery vehicle. The waste tank can hold 750 gallons, while the plastic freshwater tank holds 350 gallons. It has a Masport HXL3F vacuum pump (106 cfm) controlled by a push-button switch inside the cab. Made of 1/4-inch steel, features include diamond-plate deck, 2-inch primary trap, 2-inch secondary trap, two 3-inch sight glasses, 2-inch ball valve, 3-inch discharge ball valve, 25-foot, 2-inch hose and two 18- by 18- by 36-inch tool boxes. The tank can be fitted on a chassis with GVW of 19,500 or greater and cab-to-axle dimension of 108 to 120 inches. Overall length, with lift gate, is 15 feet. 585/657-4104; www.crescent-tank.com.

 

CT Fabrication LLC

The Model VR130 130-barrel trailer from CT Fabrication LLC has a carbon steel tank with 1/4-inch ASME F & D heads, double-welded seams and 1/4-inch steel dished baffles. The trailer has a 25,000-pound tandem axle with hub piloted steel wheels. Spring-ride or air-ride suspension is available, along with ABS brakes. An adjustable king pin and two-speed landing gear are standard. A 20-inch manway is located at the top center of the tank. Other manways are optional. A primary scrubber/manway is located at the top front of the tank. Two 4-inch NPT butterfly drain valves with 10-position handles are located at the rear. A 300-cfm secondary moisture trap, 10-gallon capacity, with 1-inch drain is included. Other options include full-length or rear-mount hose trays, tool boxes, ladders and walkways, LED lighting, vacuum packages, float level or sight indicators. Vacuum and frac tanks are hydro-tested at atmospheric pressure before being lined with two-coat gel epoxy. 785/335-2512; www.ctfabrication.com.

 

EMI Sales LLC

Made of 1/4-inch, A35 steel, 50- to 110-barrel tanks from EMI Sales LLC are pressure-tested with full welds inside and out. Features include 3/8-inch reinforced plate at rear outlets, two one-piece formed baffles, two 21-inch top manways, one with 12-inch primary, 24- by 14- by 12-inch tool box, two exterior ladders, two full-length hose trays and catwalks, four spring tank mounts and two solid mounts. Other features include powder-coated exterior and epoxy-coated interior, 25-inch rear manway, choice of level indicators (three sight glasses, one in-tank float or one exterior tube), 4-inch discharge outlets, Masport HXL75MV water-cooled pump, secondary, final filter and vacuum system muffler. Options include oilfield front bumper, high-pressure Triplex pumps and transfer pump system. 877/500-3993; www.emisales.net.

 

GapVax Inc.

The XVT industrial vacuum loader from GapVax Inc. is designed to convey heavy sludges such as drilling fluid, grease, septic and wastewater. The positive-displacement blower can pressure offload up to 14 psi (rated 1,400 cfm at 28 inches Hg). The body is made of 1/4-inch ASTM A-572 Grade 50 steel with a payload range of 80 to 100 barrels and a 40-degree dump angle. The filtration system features a quick-access, 10-micron washable Dacron filter. The full opening tailgate has a dual-lift cylinder and field adjustable locks for a complete seal. Options include a hydroexcavation package, lift axle, integral water tank, safety lighting, storage compartments and heavy-duty rear bumper. 888/442-7829; www.gapvax.com.

 

Global Vacuum Systems

The three-tank VOC reduction unit from Global Vacuum Systems features a 30-inch surfactant tank with full-open lid and two 30-inch carbon tanks with full-opening lid and vibrator to extract the carbon. The system is plumbed to run exhaust from the vacuum system through the surfactant tank and out one of the carbon tanks, leaving one tank for backup. The 3,000-gallon vacuum tank has an internal pressure of 25 psi and external, full vacuum pressure of 15 psi, hydrostatic test pressure of 40 psi and maximum allowable working pressure of 25 psi. The unit has an operating temperature of -20 to 200 degrees F, 1/2-inch flat bar external reinforcement rings, overturn protection, 4-inch stainless steel 25-psi pressure relief vent, primary shutoff and 3-inch, air-operated butterfly isolation valve. Other features include liquid level indicator, one half baffle, 20-inch top manway, 4-inch, air-operated suction valve, 4-inch internal riser pipe and 6-inch, air-operated discharge valve. It has an air-cooled RCF 500 Fruitland pump (350 cfm at 28 inches Hg), 30-gallon hydraulic reservoir and 20-ton capacity hoist. The tank is installed on a Peterbilt 348 with Paccar PX-8 (330 hp) engine with 10-speed Eaton Fuller transmission, 12,000-pound front axle and 40,000-pound rear axle with air-ride suspension. 936/825-2000; www.globalvacuumsystems.com.

 

Guzzler Manufacturing

The redesigned NX industrial vacuum loader from Guzzler Manufacturing has a 5,435 cfm (free air) Robuschi blower with vacuum capabilities to 28 inches Hg. Designed to recover a range of materials, the loader provides total operator control over working speed. The cyclone and bag houses are configured together to maximize efficiency and reduce overall truck weight without sacrificing capacity. Vacuum Recovery technology incorporates automatic offline cleaning of the integral bag house and cyclone. The fully opening door and 50-degree dump angle ensure quick unloading of the 18-cubic-yard debris tank. 800/627-3171; www.guzzler.com.

 

Heritage Truck Equipment

The HTE 110-barrel (4,620 gallon) steel vacuum tank from Heritage Truck Equipment features 1/4-inch SA-36 steel walls with 5/16-inch flanged and dished heads, three fully reinforced baffles with crawl hole and full-length double-leg sills with 2-inch, no-slip grooved rubber cushion. Other features include industrial-coated steel trays with hose tie downs, industrial-coated tank carriage and rear-mounted dual oversized hose hangers. The tank has a Fruitland RCF500 vacuum pump Eliminator package with integrated filter, 12-inch, low-profile primary shutoff with 3-inch hose connection and 10-gallon secondary moisture trap with 3-inch hose connection. It has top- and rear-access manways, heavy-duty oilfield bumpers with storage compartments, stainless steel tray-mounted tool box, epoxy- coated interior, heated valve collars, dual, rear-center 4-inch load/discharge bronze level valve and dual front-side 4-inch load/discharge level valves. There’s a 4-inch inspection port at the top of the tank, three rear 5-inch sight glasses, 1-inch front-mounted sight tube, SeeLevel Annihilator tank volume indicator, tank access ladders and strobe light package. 330/699-4491; www.heritagetruck.com.

 

ITI Trailers & Truck Bodies Inc.

The 110-barrel (4,620-gallon) tank from ITI Trailers and Truck Bodies Inc. is made from corrosion-resistant 304 grade stainless steel and features stainless steel hose trays, NVE 607 Max Package pump with NVE camlock manways, fabricated stainless steel baffles, heavy-duty oilfield bumper with integrated drip pans and bucket holders. Tanks can be customized to meet job size and needs. 888/634-0080; www.itimfg.com.

 

Labrie Environmental Group

The Juggler pumping and liquid-solid separating system from Labrie Environmental Group returns liquid that is 99.98 percent free of solids without affecting bacterial flora. The tank has a 3,600-gallon front solids capacity and 1,200-gallon rear water tank with 1/4-inch aluminum side walls, 3/8-inch aluminum tank head and reinforcing rings. Features include 21-inch upper center solids and water access doors, 3-inch loading valve at back for separating process and 4-inch driver-side loading valve for solids pumping. A 6-inch unloading valve is located at the rear. The truck has a 125-gpm filter flow capacity, filter operating pressure of 13 psi and remote control reach of 300 feet. Standard pump is an NVE 743 (527 cfm, 27 inches Hg and maximum pressure of 10 psi). An optional NVE 953 (872 cfm, 27 inches Hg, 10 psi) is available. Other options include hose reel and 3,000-psi pressure washer with 4-gpm flow capacity. 800/463-6638; www.labriegroup.com.

 

LC Tanks Inc.

The 4,700-gallon Progress stainless steel tank from LC Tanks Inc. features a hoist, opening rear door and NVE4310 Pro-Pack Plus blower system delivering 931 cfm at 24 inches Hg. The tank is mounted on a 2012 Kenworth T800 chassis, powered by a Paccar MX13, 455-hp engine with 10-speed transmission, 20,000-pound front axle, 40,000-pound rear axle and two 1,500-pound pusher axles. 888/848-3727.

 

LMT Inc.

The ST Series 4,500-gallon vacuum truck from LMT Inc. has a 1/4-inch carbon steel tank body, heads and full interior surge baffles resting on full-length tank rails. Other features include full-length removable hose trays, tank ladder, 25-inch top hatch and 12-inch hose hangers. Tank body and components are finished with an epoxy primer and urethane topcoat. Standard accessories include 3-inch load and 4-inch discharge valves, three 5-inch sight eyes, vacuum and pressure relief valves, primary and secondary shutoffs, and full light package. Options include stainless steel valve heaters, 36-inch rear manway, two 48- by 24- by 24-inch cabinets, 3-inch 400-cfm oil-catch muffler, Moro PM 110 water-cooled pump with full frame pump stand. Other options include sandblasted tank interior with spray lining and aluminum, diamond-plate guards. 800/545-0174; www.tanksandpumps.com.

 

Marsh Industrial

The 2,000-gallon industrial vacuum unit from Marsh Industrial has a 1/4-inch carbon steel shell with 1/4-inch F & D heads. Features include two internal surge baffles welded to reinforcing pads, pressure and vacuum relief valves, one 4-inch load line in the rear head with standpipe and deflector plate with one 4-inch brass level valve with aluminum cam and groove fitting, one 6-inch discharge line in rear head with 1-inch brass lever valve with aluminum cam, groove fitting and dust cover. Other features include hose hooks at rear, hydraulic-open rear door, hydraulic hoist with full-length subframe and hinges mounted to frame, non-dumping fenders, hose trays, NVE 957 1,007-cfm Max Pack blower continuous vacuum pumping system, PTO-driven right-angle gearbox for pump drive with safety coupler for pump and PTO, four-way valve for vacuum and pressure operations, aluminum moisture trap, final filter, intake silencer and exhaust muffler. The tank is sandblasted near white, primed and coated with urethane paint. 800/952-1537; www.marshind.com.

 

Mid-State Tank Co. Inc.

The 4,000-gallon aluminum tank from Mid-State Tank Co. Inc. features a 20-inch top manway, 20-inch rear manway, primary, three 5-inch sight eyes, pressure relief valve, 4-inch inlet, 6-inch discharge, full-length hose trays, hose support at rear, ladder to manway, LED and work lights at rear, full mounting kit and heavy-duty rear bumper. A stainless steel tank and other options are available. 217/728-8383; www.midstatetank.com.

 

Mid-State Truck Service Inc.

The 2011 International DuraStar vacuum truck from Mid-State Truck Service Inc. has a 2,500-gallon steel tank, aluminum walkway and hose platform, 21-inch rear cleanout hatch with 6-inch piston valve and camlocks. Other features include intake nipple with 4-inch level valve and camlocks, 5-inch sight glass, 24- by 24- by 48-inch tool box, PTO hot shift and Masport HXL15V air-cooled vacuum pump. The 33,000-pound GVW truck is powered by a MaxxForce DT 245-hp engine with compression brake, Allison 2500RDS transmission, air-ride cab, heated mirrors and 70-gallon aluminum fuel tank. 800/236-2044; www.midstatetruck.com.

 

Pik Rite Inc.

The 3,600-gallon vacuum tank from Pik Rite Inc. features a 12-inch, low-profile primary with stainless steel float ball and internal plumbing to frame-mounted secondary. Other features include frame-mounted cleanable oil-catch muffler, 20-inch top manway, ladder, LED light package, 20-inch rear manway with 6-inch discharge and 4-inch inlet with standpipe. It has polished aluminum hose trays, 2- by 6-inch tubular bumper, full walkthrough baffle system, spring-loaded mounting systems, a variety of pump options, 5-inch sight eyes, dual vacuum and pressure relief valves, heavy-duty pump stand, easy-to-reach hose hooks and chip guard on hose tray and tank sides. 800/326-9763; www.pikrite.com.

 

Satellite Industries Inc.

The redesigned MD950 (650-gallon waste/300-gallon freshwater) medium-size route truck from Satellite Industries Inc. features reinforced skirting, increased rear sight visibility, an additional 10 square feet of catwalk space, reinforced side cabinets and two additional cross supports for increased strength and stability. The tank also comes with 30-foot hose and internal baffles. The truck has a 165-inch wheelbase for tight turning and easy handling. Interior controls enable the driver to operate the pump from the cab. The unit is available with a two- or four-wheel drive vehicle and mild or stainless steel or aluminum tank. 800/328-3332; www.satelliteindustries.com.

 

Stahly

The Eliminator 5500 biosolids 131-barrel (5,500-gallon) applicator from Stahly is available with 4,200- through 6,000-gallon 5/16-inch carbon steel tanks treated with Tinemac corrosion protection inside. Powered by a 450-hp Tier IV engine with Allison automatic or manual transmission, the tank is mounted on a Peterbilt, or Western Star high-flotation 4x2, 4x4, 6x4 or 6x6 chassis. Features include NVE Challenger model 65, 365-cfm pump with 3-inch secondary. Options include diesel flush pump kit, 5-inch sight glass and stainless steel float-ball indicators, 12-inch primary with stainless steel ball and seat. Other features include two 25-inch manways with greaseable turn-wheels, full-welded 6- to 80-inch Schedule 80 plumbing, 6-inch air-operated knife valves and 6-inch backup valves. The applicator has an optional rear spray deflector or injection toolbar with or without monitoring capabilities and/or variable-rate GPS controller. 800/678-2459; www.stahly.com.

 

Super Products LLC

The Supersucker industrial vacuum from Super Products LLC is made of 1/4-inch steel. Offering 18-yard payload capacity, it has a 51-degree dump angle, full-opening tailgate with two lift cylinders. Single-mode filtration enables the loading of wet or dry material without changeover. The reverse air pulsation system continuously cleans the 60 snap-ring, acrylic-coated filter bags. Side-door access to the bag house allows for quick bag removal. One large cyclone with large passageways allows greater airflow. Positive displacement vacuum pumps with ductile iron impellers and high temperature seals provide airflow of 5,000 to 6,000 cfm and up to 28 inches Hg. 800/837-9711; www.superproductscorp.com.

 

Supervac 2000

Designed to operate in extreme weather conditions, the Supervac 6400 hydroexcavator from Supervac 2000 has a 71-barrel (3,000 gallons) carbon steel debris tank, 6,400-cfm vacuum pump with 27 inches Hg, double-wall insulated 1,250-gallon water tank, two cyclones and cartridge filter, 6,000-psi, 10-gpm water pump and 26-foot radius hydraulic boom. Other features include hydraulic door locks, insulated enclosure (less than 85 dBA), recirculation water pump and 100-foot hose reel capacity. 866/839-5702; www.supervac2000.com.

 

Thompson Tank Inc.

The Model WT-120-800000 from Thompson Tank Inc. is designed for 50-psi offloading and full vacuum loading. The tank is certified for ASME Section VIII and DOT 407 and 412 specifications to carry flammable, combustible and corrosive products. The self-contained trailer is available with a variety of vacuum pumps, coupled with a Deutz air-cooled diesel engine using a twin-disc style clutch and reduction gearbox that allows the Tier III diesel to consistently run at optimal efficiency and at the peak of its torque curve, while limiting the system to less than 49 hp. The bottom shell is made of light gauge stainless steel to help prevent and eliminate corrosion. Loading and unloading outlets are made from rolled pipe, creating large swooping radiuses at less than a 70-degree angle, eliminating clogging when dealing with abrasive and semi-solid materials, and allowing for complete drainage. The trailer is equipped with on/off highway suspensions designed for a 6-inch slope from front to rear to improve washout efficiency. 800/421-7545; www.thompsontank.com.

 

Transway Systems Inc.

The HV-64, four-season hydroexcavator from Transway Systems Inc. features a Robuschi RB-DV145 (6,400 cfm) blower driven via an OMSI transfer case mounted within an acoustic enclosure. Water pressure is created with a hydraulically driven Giant LP600 water pump (6,000 psi). The 3,000-gallon debris tank has a hydraulically operated hoist, full-open rear door and door locks. The 1,500-gallon polyethylene water tank is housed in an insulated and heated compartment. Water is heated by a 700,000-Btu Unimanix diesel-fired heater. Other features include 26-foot, 8-inch suction boom equipped with joystick control, wired pendant control and wireless remote control. The debris tank has a hydraulically operated trash pump for liquid removal. The unit is mounted on a 2010 Western Star 4964 dual tandem-axle chassis. 800/263-4508; www.transwaysystems.com.

 

Truck Works Inc.

The 5,000-gallon Model VT-5000A, single-compartment aluminum tank from Truck Works Inc. features anti-surge baffles, exterior rings, Masport HXL15 350-cfm air-cooled pump, four 20-inch top manways, 20-inch rear cleanout, primary moisture trap, secondary moisture trap brackets and three 5-inch sight eyes. Other features include full-length hose trays with drains, hose protector, hose hooks, rear work lights, ladder, 4-inch brass lever valve adapter and cap, 4-inch rear brass lever valve adapter and cap, DOT rear bumper and DOT vapor proof lighting. The tank is mounted on a T800 Kenworth 66,000 GVW chassis with 425-hp engine and 10-speed transmission. 602/233-3713; www.truckworksinc.com.

 

Vacutrux Ltd.

The 4,300-gallon vacuum truck from Vacutrux Ltd. features an angle-driven, liquid-cooled 753 Wallenstein pump, capable of continuous running and reaching 27 inches Hg. The pump has mechanical piston-pump lube and air-injection cooling with an independent liquid cooler unit. Other features include hot-dip galvanized tank and components, airflow ranges from 80 to 5,300 cfm, hydraulic tank hoist and vibrator, wireless output remote control system, high-pressure wash, heat collars for tank valves and heated tank components for extreme conditions. The tank is mounted on a tandem-axle 2011 International 7500 chassis with 350-hp MaxxForce engine and 10-speed transmission. 800/305-4305; www.vacutrux.com.

 

Wee Engineer Inc.

The Ford F-550 portable restroom service truck from Wee Engineer Inc. features a 600-gallon waste/250-gallon freshwater aluminum tank manufactured by Progress Tank. Able to carry four restrooms, the truck has an Anthony lift gate, PTO-driven Masport HXL4 vacuum pump, 12-volt freshwater pump and Hannay hose reel. The truck also can be used to carry a portable grease trap service unit to pump under-sink traps and download to the truck. 877/296-2555; www.wee-engineer.com.

 

Andert Inc.

The 4,700-gallon, custom-designed, truck-mounted vacuum tank from Andert Inc. has a 1/4-inch carbon steel shell with 5/16-inch carbon steel heads. Features include two full baffles with three internal rings, 20-inch Betts top and rear manway, low-profile top primary with aluminum lid, stainless steel hose trays and 2-inch sight tube mounted in the front dome. Other features include bolted ball valves, rear hose hooks, two aluminum tool boxes, heavy-duty rear bumper, polished aluminum on barrel sides, NVE 4310 blower in sound-proof stainless steel cabinet, direct-drive-off-PTO jetter system delivering 4 gpm and 3,500 psi. Stainless steel lines to rear hose reels are routed in frame rail for protection. 860/974-3893.

 

Cusco

The Hydro-Trencher from Cusco is designed for hydroexcavating around oil and gas pipelines, installing fiber optic cables, repairing utility lines or excavating in remote areas with limited access. The unit uses directional hydro boring and vacuum removal of waste materials, including liquids, sludge, slurries, mud, gravel and other solids. Features include cyclonic filtration technology, airflow ratings of 3,500 to 5,500 cfm generating 28 inches Hg, as well as a wash pump capable of 18 gpm at 3,000 psi and high-pressure waterjetting. Tank volumes range from 3,000 to 3,500 gallons. Options include high-pressure wash system, stainless steel tank, heated valves, enclosed hot water burner system, storage cabinets and standup lockers. A range of configurations are available. 800/490-3541; www.wastequip-cusco.com.

 

FMI Truck Sales & Service

The WorkMate 1050 portable restroom service vehicle from FMI Truck Sales & Service features a sidewinder tank (700 gallons waste and two 175-gallon freshwater tanks) for equal weight distribution, extended brake life and improved handling. Brine, freshwater, premix of any combination of fluids can be carried in the polyethylene tanks. The ergonomic workstation offers 60 cubic feet of storage space. The vehicle can carry four restrooms or six with the optional overhead carrier. Standard features include internal baffle with two sight glasses and 4-inch dump on the passenger side of the waste tank. It has a Masport HXL4V vacuum pump (156 cfm at 1,400 rpm), in-tank primary shutoff valve, 2 1/2-gallon secondary scrubber shutoff with drain, oil-catch muffler, one-button-shift PTO, 20 gpm at 42 psi freshwater delivery system. The tank is mounted on 19,500-pound GVW Isuzu chassis (also can be mounted on Hino, UD, Ford, GM and other chassis) with 190-hp turbocharged engine, 7,060-pound front axle and 13,680-pound rear axle. Overall length (carrier up) is 20 feet, 2 inches. 800/927-8750; www.fmitrucks.com.

 

Hi-Vac

The HVV 4915 industrial vacuum loader from Hi-Vac features 27 inches of Hg. The convex sides of the filtration system provide structural integrity while helping prevent material buildup. The cyclonic ring prefilter and 10-inch diameter inlet hose work to slow the inlet velocity of material being vacuumed. The 16-foot-long main payload compartment enhances material separation while large diameter air ducts between the main payload compartment, dual cyclones and bag house are designed to provide more airflow for less differential pressure loss. The bag house final filter system utilizes 68 snap-ring filter bags, providing 445 square feet of filter media. 800/752-2400; www.hi-vac.com.

 

Imperial Industries Inc.

The 4,000-gallon, 1/4-inch 5454 aluminum liquid waste tank from Imperial Industries Inc. measures 76 inches in diameter and has an overall length of 18.2 feet. All seams are welded on exterior and interior of wrap sheets, manways and fittings. Features include flanged and dished heads with 6-inch interior channels, 1/4-inch belly wrap on lower third, extruded skids with pads, hose trays with continuous weld on inner and outer surfaces and interior air line. 800/558-2945; www.imperialind.com.

 

Ledwell & Son

The 130-barrel (5,460-gallon) Hurricane transport trailer from Ledwell & Son is made of ASME/DOT 412 carbon or stainless steel with self-contained vacuum pump (up to 900 cfm), pressure offload and hydraulically operated and full-opening rear door (tank hoist and interior coating available). Other features include four 20-inch top manways, rear work lights, 6-inch discharge (4-inch and 6-inch intake options), full-length catwalk with stops and rail, spring suspension (Hutch 9700), heavy-duty landing gear, float level indicator, heavy-duty rear bumper and 22,500-pound air-brake axles. 888/533-9355; www.ledwell.com.

 

Lely Manufacturing Inc.

The 1,100-gallon waste/400-gallon freshwater service vehicle from Lely Manufacturing has a 1/4-inch carbon steel shell with two integral anti-surge baffles. The tank is spring mounted to the truck chassis for decreased fatigue and increased service life. Pipe routes and diameter are matched to pump specifications for maximum performance. Features include large-diameter manways, decking trays, hose hooks, waterproof storage cabinets, sight glasses, dual input service hoses, low-level clean water tank fill point and operator safety wash outlet. 800/334-2763; www.lelyus.com.

 

Prebola Products Co. Inc.

Bobtail vacuum tanks from Prebola Products Co. Inc. are designed for the specific needs of freshwater, drilling mud and frac-water residual waste haulers. Standard features include 4,620-gallon capacity, 1/4-inch A36 steel construction, three dished anti-surge baffles, 12-inch primary shutoff, internal vacuum piping, 2-inch blow-down line and 2-inch auxiliary safety pressure relief line. Other features include four sight glasses or liquid level indicator, plug-and-play pump packages, work light package, full-length hose trays, heated valves, double 4-inch fill/discharge piping routed through rear sump for 100 percent tank draining. The truck has heavy-duty bumpers, extreme-duty tow loop, drip-catch pan and two integrated lighted tool boxes. Tanks are mounted to the chassis of choice by a rigid rear mount, six double-spring mounts and vulcanized rubber sill strips to eliminate spacer creep. All tanks come with a system that allows exhaust to circulate beneath the tank, reducing cold-weather ice buildup in the tank. 570/693-3036; www.prebola.com.

 

Progress Tank

The aluminum DOT 407/412 tank from Progress Tank is equipped for hydro-carbon recovery. Features include a 3-inch Blackmer product pump and Robuschi RB-DV45 500-cfm blower. The unit has air-operated inlet and discharge valves with heated collars, BASE wireless remote to control pump engagement, valve operation and emergency shutdown of the truck engine. The 2012 International WorkStar chassis has heavy-duty oilfield front and rear bumpers and is powered by a 475-hp MaxxForce 13 engine. 800/558-9750; www.progresstank.com.

 

TankTec

The custom-designed 3,600-gallon polished aluminum tank from TankTec features hydraulic lift, full-opening rear door and Robuschi RB-DV45 blower pump mounted on a Mack Granite chassis (Peterbilt, Kenworth, Freightliner or International available). The tank is manufactured from 5454 aluminum by Progress Tank. 888/428-6422; www.tanktec.biz.

 

TOICO Industries

The 2,000-gallon aluminum combo unit (1,500-gallon waste/500-gallon freshwater) from TOICO Industries offers the versatility of a PRT tank with the ability to pump septic tanks and transport portable restrooms. Features include primary and secondary moisture traps, Masport HXL4V (165 cfm) pump, manway, dual service capability, waste-level indicators, 12-volt washdown pump, spring rewind hose reels and cabinets. 888/935-1133; www.toico.com.

 

Transport Truck Sales

The 3,800-gallon waste/200-gallon freshwater vacuum tank from Transport Truck Sales has three 21-inch manways (two on top and one in the rear), internally piped primary, Masport 400HXL liquid-cooled pump (410 cfm) with horizontal scrubber and final filter, and tool box-mounted O’Brien jetter system. The unit is mounted on a custom-painted 2008 Peterbilt 357 chassis with C-15 Cat engine (475 hp), engine brake and 13-speed Eaton Fuller transmission. It has a 20,000-pound front axle and 46,000-pound rear axle with Hendrickson suspension and full-locking rear end. 888/395-7551; www.transporttruck.com.