August Product News

Featured new products.
August Product News
Clarus Offers Turbine STEP System

IMPCO Offers Brush-On Polymer Sealant

AlumiSeal brush-on methacrylate compound from IMPCO Inc. is made for sealing porosity in aluminum parts and welds that will contain liquids or gases under pressure. The sealant wicks into pores, seams and between close-fitting non-ferrous metal surfaces. Once cured, excess surface material can be rinsed away with water. The sealant does not alter critical surface dimensions. The sealant comes in a 250-ml kit with a shelf life of 6-12 months. Mixing the sealant’s two compounds creates a VOC-free, low-viscosity, pale-blue liquid that can be applied by brush. Once mixed, the sealant has a pot life of one day. The cured seal can withstand continuous service temperatures of up to 356 degrees F and up to 150 psi. 800/779-2491; www.impco-inc.com.

 

Gamajet Introduces PowerFlex Tank Cleaner

The PowerFlex tank cleaning machine from Gamajet Cleaning Systems has a standard operating range of 50-100 psi and 20-80 gpm. At a distance of 10 feet, operating at 30 gpm, the system produces nearly 10 pounds of force and can maintain 8-15 pounds of force. Features include a sanitary design, FDA-compliant materials, self-cleaning and draining capabilities, and high-polish sanitary finish. 877/426-2538; www.gamajet.com.

 

Reelcraft Introduces Side-Mount Hose Reels

Series 4000, 5000 and 5005 hose reels from Reelcraft Industries Inc. feature a compact, space-saving design. The addition of a rigid side mount allows reels to be mounted on either the right or left side. The heavy-gauge, side-mount plate has slotted mounting holes for easy installation. Right (top wind) or left (bottom wind) configurations are available. 800/444-3134; www.reelcraft.com.

 

Liberty Introduces Sump Pump Duplex Control

The 5050 Series duplex sump pump control from Liberty Pumps provides alternating operation of two 120-volt pumps. In the event of a pump failure, power is switched to the other pump and the built-in alarm is activated. The control is NEMA 1 rated for indoor mounting and is available with vertical style or wide angle floats. Plug-in-ready wiring offers easy installation. 800/543-2550; www.libertypumps.com.

 

Clarus Offers Turbine STEP System

The Turbine STEP septic tank effluent pump system from Clarus Environmental is designed for simplex or duplex applications in a single polyethylene pump vault. The large, unobstructed area for float placement reduces the risk of hang ups. Made to fit any 19-inch septic tank opening, pumps are available in 11-, 19-, 27-, 35-, 55- and 85-gpm models. Standard height is 56 inches. Custom heights range from 51 to 96 inches. The deep-pleated filter provides 924 linear feet of 1/16-inch filtration and is easily removed for cleaning. The system’s flat-bottom design is made for free-standing applications. Pipe supports are available for suspended applications. The inlet is predrilled at the factory or can be blank for field customization. 877/244-9340; www.clarusenvironmental.com.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.