Product News - June 2010

Featured products of June

AlturnaMATS Introduces Galvanized Turn-A-Link

Steel Turn-A-Link connectors from AlturnaMATS feature a galvanized coating to resist rust. The portable roadway linking system is available in round single or double and flat single or double configurations. 888/544-6287; www.alturnamats.com.

Liberty Pumps Offers 2-Inch Guide Rail

The GR22 pump guide rail from Liberty Pumps features cast iron construction and single rail design that allows for easier installation or removal of submersible pumps in deeper pits. The unit has a 2-inch discharge, while internal 2-inch thread on the pump mating claw allows for adapting to other pumps. 800/543-2550; www.libertypumps.com.

Flexaust Offers Custom Flexible Hose

Custom flexible hoses from Flexaust can be manufactured from a variety of materials for vacuum and pumping applications. Sizes range from 1/2 to 2 inches I.D. with varying thickness, pitch, helix, split-loom, flat, special cuff, colors and other OEM characteristics. 800/343-0428; www.flexaust.com.

SJE-Rhombus Launches C-Level Sensor

The C-Level sensor from SJE-Rhombus uses floatless technology to covert tank water pressure into a low-voltage electric signal that is sent to the IFS control panel for constant tank level monitoring. The system is designed for tight spaces and provides an option for a redundant pump off-float and high water alarm in regions where the operations are required. 888/342-5753; www.sjerhombus.com.

Ace Roto-Mold Introduces Low Profile Tanks

Aquifer low profile cistern tanks from Ace Roto-Mold, a division of Den Hartog Industries Inc., include 1,000-, 1,500-, 2,000- and 2,500-gallon units designed for below and above ground applications. Made for the storage of potable and non-potable water, the tanks feature a sectional ribbing design to withstand vertical soil pressures of up to 400 psf. Tanks can be buried up to 28 inches deep and backfilled empty. Multiple fitting locations are provided to accommodate a variety of plumbing configurations. The tanks are made from FDA-compliant resins and high-density polyethylene with UV inhibitors. 800/342-3408; www.denhartogindustries.com.

TOICO Introduces PROVAC Tool Box Vacuum Tank

The 140-gallon PROVAC tool box vacuum tank from TOICO Industries is designed for emergency service, remote routes, golf courses, startup companies, grease trap, RV and campground service. The unit weighs 168 pounds and features a Conde Model 3 vacuum pump with 5.5-hp electric start Honda engine. The aluminum tank has a primary and secondary moisture trap, oil catch muffler, vacuum relief valve, cleanout ports and dual-side vacuum capabilities. Other features include a 2-inch by 30-foot Hi-Vac suction hose, wand stinger assembly and 3-inch by 15-foot discharge hose. 888/935-1133; www.toico.com.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.