Engine & Accessory offers septic/grease trucks with single-compartment tank sizes from 1,000 to 5,000 gallons. Tanks are manufactured using aluminum, stainless steel or carbon steel, with tank thickness depending on the material used. Offering various types of materials ensures the ability to give the customer the right tank for his or her application.
Tanks are a round design with baffles and include one 20-inch aluminum top manway, one 20-inch rear clean-out and a low-profile primary shut-off installed in the tank. The truck includes full-length hose trays, three 5-inch sight eyes installed in the rear head of the tank, a rear bumper approved by the Department of Transportation, a 6-inch discharge port for waste installed in the rear head, and a 4-inch suction/fill port in the rear with a standpipe. Visibility is increased with two rear work lights on the rear head and vaporproof LED lights in light boxes. The ladder includes grip-strut steps to decrease slips, increasing driver safety. Also included are hose hooks on the rear head, a DOT mounting kit with composite material mount boards, and full-length hose protectors on each side of the tank.
Steel tanks will be sandblasted, primed and painted one color. Aluminum tanks are delivered in a bright, nonpainted finish. Stainless tanks can be painted or be supplied with a polished finish. Buyers have the option of adding an epoxy coat to the inside of the tank.
Pumping System
Pumping systems can be set up for various applications. The vacuum pump comes complete with a four-way valve, pump oiling system and heavy-duty mount. All major vacuum pump manufacturers and pump sizes are available.
The drive system includes an air shift PTO with a tubular-type PTO shaft connected to the right-angle gearbox and pump coupling. Its secondary moisture trap includes a shut-off system and an oil separator. In addition, the pump includes a pressure relief valve, vacuum relief valve, liquid-filled vacuum/pressure gauge and a diesel flush system. A 4-inch brass lever valve with a cam-lock and dust cap is installed on the rear load line, while a 6-inch brass lever valve with cam lock and dust cap is installed on the rear discharge. An aluminum 18- by 18- by 30-inch toolbox also comes preinstalled.
Engine & Accessory stands strong as a three-generation family-owned business with a legacy of cutting-edge manufacturing and exceptional customer service. The tradition continues every day as a dedicated team of engineers, craftsmen and fabricators develop the most reliable, quality-driven chassis and tank trucks available. Celebrating 70 years. 800-327-5431 | info@rampstar.com | www.liquidtrucksolutions.com