Product Focus - December 2020

Product Focus - December 2020

Clarus Environmental Fusion

Interested in Onsite Systems?

Get Onsite Systems articles, news and videos right in your inbox! Sign up now.

Onsite Systems + Get Alerts

Advanced Treatment Units

Clarus Environmental Fusion 

Clarus Environmental’s Fusion systems are drop-in wastewater treatment units designed for decentralized applications where effluent quality must meet or exceed secondary treatment standards. They are designed for residential, commercial and small community applications and are available in 450- to 4,000-gpd treatment capacities. All models up to 800 gpd are NSF/ANSI Standard 40 certified to produce effluent quality of 9 mg/L CBOD5 and 9 mg/L TSS. The design enables installation without a pretreatment tank, making it suitable for sites with limited space. Effluent disposal options include conventional trenches, dosed systems, drip irrigation or disinfection with direct discharge. 800-928-7867;

Delta Treatment Systems ECOPOD

The ECOPOD for advanced wastewater treatment from Delta Treatment Systems is a series of products that are easy to install, low maintenance and effective in reducing levels of nitrogen, BOD and TSS. The design is simple, can treat 500 to 1,500 gpd for residential systems, and is NSF/ANSI 40 and 245 certified. The intratank bioreactor can be inserted into an average-sized round or rectangular concrete, fiberglass or plastic onsite wastewater treatment tank or vault. It uses a fixed-film process that is stable, reliable and robust. It is customizable for individual residential installations, cluster designs and small- to medium-size commercial applications. The odorless, quiet system is FHA- and VA-acceptable and is suitable for intermittent usage. Minimum sludge production reduces pumpout frequency, and a remote monitoring system is available. 800-219-9183;

Norweco Singulair R3

Norweco’s Singulair R3 water reuse system reduces water consumption, reuses treated effluent and recycles water to conserve and recharge water resources.  It provides a solution to chronic water shortages and reduces energy costs associated with water and wastewater treatment. The system quietly, efficiently and automatically treats all incoming wastewater to the highest level for restricted indoor and unrestricted outdoor use. It exceeds the effluent requirements of NSF/ANSI Standards 40, 245 and 350, and qualifies for Green Building credits under both the LEED rating system and the NAHB ICC 700 National Green Building Standard. By using the system and following local building code, a homeowner can expect to dramatically reduce water usage. 800-667-9326;

Orenco Systems AdvanTex AX-RT Series

The AdvanTex AX-RT Series of advanced wastewater treatment systems from Orenco Systems is designed for system repair and rehabilitation. All interior components are installed, plumbed and adjusted at the factory. Units can be shallowly buried for use between a functional, watertight septic tank and a functioning drainfield. The design includes recirculation, treatment and discharge in a single unit to simplify installation and eliminate the need for additional tanks, basins, risers and lids. The system can be maintained with an annual service call. Filters and textile media are accessible and cleanable, and control panels are touch-safe. No blower is needed for the passively vented system. An optional UV disinfection unit is available. 800-348-9843;

Park Process PolyCat

The PolyCat batch type polymer blending and injection system from Park Process is used for the preparation of liquid polymer to aid in the flocculation of septic tank waste sludge in the dewatering process. The batch tank method allows for the time necessary to uncoil the long chain polymer molecules, making them more effective in reacting with sludge solid particles. It is used in conjunction with standard solid separation devices, dewatering boxes, centrifuges, belt presses, filter presses, and other equipment requiring flocculation to enable dewatering. 855-511-7275;

Wholesale Septic Supply Aeris Aerobics D-600 NR

The Aeris Aerobics D-600 NR 600 gpd system distributed by Wholesale Septic Supply is a one-piece aerobic treatment system designed for residential applications. The system is NSF/ANSI Standard 40 and NSF/ANSI Standard 245 certified. It achieved a 7 mg/L CBOD and a 7 mg/L during the testing and reduced the total nitrogen by 65%. The test results are significantly below the Standard 40 discharge requirements and meet the stricter 10/10 discharge requirements imposed by some jurisdictions. Additionally, it meets Washington State Treatment Level B for fecal coliform without disinfection. It is manufactured with concrete, easy to install and operate, and requires low maintenance. 903-326-4800;

Aeration Systems

Geomatrix Systems SoilAir

SoilAir from Geomatrix Systems intermittently aerates the drainfield/leachfield and surrounding soils rather than constantly aerating wastewater in a tank. This process allows rapid rejuvenation of failed septic systems, extends the life span of new leachfields and enhances treatment, according to the maker. Systems can serve single-family and multifamily homes, as well as challenging and high-strength waste streams found at restaurants, hotels, marinas, laundromats, health care facilities, grocery stores, food-processing facilities and convenience stores. 888-764-5247; Retro-Air

The Retro-Air from is designed to deliver oxygen to the tank, allowing the septic field to properly absorb effluent. The unit is made to be UV resistant and operates at a low noise so it can be mounted next to the septic tank, or right next to the house. It is designed to effectively remove biomat buildup, preventing system failure, and rejuvenating system health and efficiency. 800-778-1540;

Alarm Systems/Components

Septic Products Observer 400

The Observer 400 system monitoring device from Septic Products is a 120-volt indoor/outdoor high-water alarm that includes a 15-foot alarm float for high levels. It includes a large 360-degree indicating light and 85 dB at 10 feet audible alarm. It comes with a test-normal-silence switch, automatic alarm reset, auxiliary contacts and 120-volt circuit power for the pump. It has easy access to the interior components for a repairable design. The alarm can be adapted for use as either a high- or low-level alarm. It is built and labeled to UL 508A. 419-282-5933;

SJE Rhombus Xpert Alert Wi-Fi

The Xpert Alert Wi-Fi indoor alarm system from SJE Rhombus helps protect a home from costly damage due to flooding, pump failure or freezing pipes. The system monitors and reports residential alarm condition by notifying locally (audible and visual alarms) and remotely via SMS text messages and/or emails. It uses an existing Wi-Fi or Ethernet network to send messages, meaning there are no monthly fees or contracts. The sleek design incorporates an LED alarm light ring that illuminates red for Alarm 1 and amber for Alarm 2. The red low-temperature indicator activates at 40 degrees F to alert about potential freezing conditions, but it can be deactivated for cold climates. It is CSA certified. 888-342-5753;

 Effluent/Sewage/Sump/Aeration/Grinder Pumps

Ashland Pump SW Series

The SW40, SW50 and SW75 Series from Ashland Pump are equipped with cast iron vortex impellers. The nonclogging vortex design on the fractional horsepower pumps allows better passing of materials that may get flushed (wipes, rags, etc.), while maintaining the same performance. The vortex impellers are well suited for today’s waste stream, as they are low profile and resistant to clogging. The pumps have been updated to 3,450 rpm to achieve the same performance as the previous two-vane design model. 855-281-6830;

Hydra-Tech Pumps S6SHR

The S6SHR 6-inch hydraulic submersible shredder pump from Hydra-Tech Pumps is designed to continuously rip and shear solids with a 360-degree shredding action. The pump’s carbide-tipped impeller and hardened macerator suction plate produce a shredding action that keeps the discharge open. A guide rail assembly is available for stationary applications. Combined with HT35 to HT75 power units, it is capable of flows up to 1,000 gpm. The safe and variable-speed hydraulic drive can be used where electric power is hazardous or impractical. 570-645-3779;

Liberty Pumps ProVore  

The ProVore grinder from Liberty Pumps is designed for use in applications where the addition of a bathroom or other fixtures below sewer lines requires pumping. It has the same V-Slice cutter technology used in the Omnivore series, brought down to a more cost-effective level. Powered by a 1 hp motor, this smaller grinder is designed to operate on a standard 115- or 230-volt circuit, requiring only a 20-amp breaker. No special wiring is needed. The pump comes with a 2-inch vertical-style discharge and a standard leg pattern matching the LE Series. This allows for an easy retrofit into existing systems. Compact factory-assembled systems are available in both simplex and duplex versions: the ProVore 380 and ProVore 680. 800-543-2550;

Polylok PL-CPE4A

The Polylok PL-CPE4A is a submersible, 4/10 hp, 115-volt, single-phase effluent pump with a 2-inch NPT vertical discharge. It has a maximum head of 38 feet and a maximum flow of 56 gpm. The pump is designed with a 3,450 rpm oil-filled permanent split-capacitor motor and has an amp rating of 6.6 for 115 volts, a rugged cast iron housing and volute equipped with a cast iron vortex impeller capable of passing 3/4-inch-diameter solids. The stainless steel shaft is supported by two single-row, oil-lubricated ball bearings. The shaft seal is an inboard design with a secondary Exclusion V seal. It has a 20-foot UL/CSA-listed power cable suitable for submersible service and fitted with a three-prong plug. The unit is supplied with an integrated clip for the included piggyback mechanical float switch and used for automatic operation. 888-765-9565;


Anua BioCoir

The BioCoir recirculating media biofilter from Anua is designed to be simple to install and easy to operate. It provides stable treatment across a broad range of applications, with no constantly running, noisy blowers or motors, according to the maker. It uses a coconut coir media housed in a preassembled pod. Coir refers to the fibers that make up the thick husk of a coconut. The coconut fiber is low cost, an upcycled resource and high in lignin content, which results in a durable material. Pretreated effluent is time-dosed over the media using helical spray nozzles to provide uniform distribution. Treatment is optimized by recirculating effluent through the media multiple times. It is certified to NSF/ANSI Standard 40, Class I and third-party tested to reduce nitrogen by more than 50%. Residential and commercial configurations are available. 336-547-9338;

BioMicrobics SaniTEE

SaniTEE nonclog effluent screens from BioMicrobics deflect solids back into a tank, while simultaneously attenuating surge flow. They drop in a standard 4-inch septic tank (for new builds or retrofitted) outlet tee. They are easily cleaned with a clean-in-place swab handle with a Buna-N disk fastened to the shaft. To clean, move the swab handle up and down to pass the swab through the center several times to act as a reverse pump to dislodge debris in the filter or angled slots. No removal or running water is necessary. Solids touching the vertical surface of the screen tend to slough off and fall back into the septic tank, making it somewhat self-cleaning. In general, the 4-, 8- and 16-inch screen should be for use on conventional and advanced septic systems, and is suitable for all types of commercial high-strength wastewater treatment systems. 800-753-3278;

SeptiTech STAAR filter systems

SeptiTech STAAR (Smart Trickling Anaerobic/Aerobic Recirculating) filter systems are designed for residential and commercial properties with minimal operator oversight, while delivering consistent treatment during peak, low or intermittent flows. Using an unsaturated, engineered textile media to treat wastewater that meets strict permit limits, the commercial filter system provides a simple, automatic equalization and clarification process for 500- to more than 150,000-gpd flows. The biological trickling filter technology also maintains low levels of Nitrate-N, with all below-grade components that fit in watertight concrete, plastic or fiberglass tanks. Smart technology allows the system to go into a sleep mode to achieve lower operating costs and power requirements. Systems are ETV-EPA verified and NSF/ANSI Standard 40/245 certified. 800-753-3278;

Sim/Tech Filter STF-100A2

The STF-100A2 pressure filter from Sim/Tech Filter helps maintain proper and efficient year-round operation of mounds, sand filters and other pressurized distribution systems. The low head-loss (0.21 psi) pressure filter mounts on the discharge side of an effluent pump, acting as a last line of defense to prevent plugged holes and reduce effluent TSS. This mounting location also extends the time between servicing. The vortex action created by the pump scrubs the screen and the backflow through the filter after the pump shuts off, washing debris out. A single 2-inch filter can handle flow rates up to 83.8 gpm. It can be designed to handle almost any flow rate or load. Larger 3- and 4-inch filters are available. The standard screen filters to 1/16 inch, and optional socks allow for additional filtration to 0.024, 0.007 or 0.004 inch. 888-999-3290;

Inspection Equipment


The CUES MPlus+ XL push system is designed for easy operation and flexibility with an all-in-one setup and quick removal of the control unit, which can be used separately. It includes a coiler configuration and pan-and-tilt camera for mainline and larger pipeline applications up to 500 feet. It integrates video observation coding, observation coding interface and digital recording. The lightweight system includes large, durable wheels for portability and a balanced footprint for stability. It is manufactured to handle rigorous field use. 800-327-7791;

Ratech Electronics Plumber’s Helper Jr.

The Plumber’s Helper Jr. pipe inspection system from Ratech Electronics is based on a small-scale reel and comes with 100 feet of mini Gel Rod cable, a removable compact command module with 7.1-inch LCD, a built-in battery and an SD recorder for recording digital images and video. This mini pipe inspection system is available with a full-spectrum, 1.375-inch, self-leveling color camera; a standard color camera; or any of the company’s three micro camera heads — 5/8-, 3/4- or 1-inch diameter. 905-660-7072;

Subsite Electronics lateral and mainline inspection system 

The lateral and mainline inspection system from Subsite Electronics is a fully integrated single-conductor technology lateral launch system and performs mainline and lateral pipeline inspections simultaneously. This second-generation system uses picture-in-picture or dual video monitors and can inspect mainlines up to 500 feet and laterals of up to 200 feet. It can be used to inspect mainlines from 6 to 24 inches and lateral lines from 4 to 8 inches in diameter. It has a 40-1 zoom, pan-and-rotate mainline camera with auto iris and autofocus, a color rear-view camera, tilt connector for easy deployment, and a high-resolution RodStar lateral camera. It offers a dual video monitor view format that lets the user view the mainline and lateral simultaneously. The six-wheel-drive tractor has three forward speeds, reverse and freewheel. 800-846-2713;


Easy Kleen Pressure Systems Groundhog Jetter

The Groundhog Jetter from Easy Kleen Pressure Systems is designed to blast through clogged pipes with a 35 hp Vanguard engine providing 12 gpm at 3,500 psi. It is compact and can be transported in a pickup truck or van, with trailer options available. It includes a fully welded, powder-coated, 2-inch steel tube frame, drilled and tapped, which houses the 200-gallon water tank. It comes with an accessible breather and 10-gallon fuel tank, General Pump with gearbox drive, 12-volt-powered hose reel with 300 feet of 3/8-inch jetter hose, hose guides, a super swivel and foot-pedal control, emergency shut-off valve and hour meter. Optional remote features include hose reel-in, motor off/speed control and pressure on/off. 800-315-5533;

General Pipe Cleaners JM-1000 Mini-Jet

The JM-1000 Mini-Jet from General Pipe Cleaners includes a high-performance, stainless steel braid jet hose for drain cleaning power and performance in a small package. The stainless steel braid/Teflon core hoses are available in a variety of lengths and are also optimized for the JM-1450 electric jet. The Mini-Jet can clear grease, sand and ice from small lines, sinks and laundry drains with 1,500 psi, high-pressure water spray. Its diamond-plate metal case safely shields the pump and motor assembly from job site abuse. The hose smoothly slides the jet nozzle down 1 1/2- to 3-inch drainlines, navigating tight bends. The 3/16-inch Teflon core also reduces flow resistance, improving small-line cleaning power. The package includes a four-piece nozzle set, water supply hose, shut-off valve and universal faucet adapter. 800-245-6200;

MyTana Economic skid-mounted jetter

MyTana’s compact Economic skid-mounted jetter fits in medium-duty commercial vehicles. Suitable for unblocking and cleaning lines up to 24 inches or surface cleaning, the unit delivers cleaning pressure up to 3,000 psi and water flow up to 26 gpm. A hydraulic hose reel swivels 225 degrees and holds 400 feet of 1/2-inch hose. There are two engine options — 33 or 58 hp. The Economic is one of six customizable models of compact skid- and truck-mounted high-pressure jetting and jet/vac units offered. It is built by ROM. 800-328-8170;


BrenLin Seal-R

Seal-R septic tank lids from BrenLin create a strong seal between the septic tank and the riser, eliminating water infiltration between the tank and riser. They are made of durable materials, range from 12 to 42 inches and can be personalized with a service provider’s company information. The 42-inch lid meets growing demand for bigger risers to accommodate new technology. 888-606-1998;


Superior Signal 5E Electric Smoker

The 5E Electric Smoker from Superior Signal offers a cost-effective and green solution to find difficult leaks and odors in residential and commercial plumbing systems. Connect the blower to any plumbing clean-out or vent, with the appropriate-size smoke candle to force smoke through faults and cracks, easily identifying sources of odor and hard-to-find leaks. Smoke candles produce a highly visible, nontoxic smoke and are biodegradable. They are manufactured with zero-waste stream and include labels printed with vegetable-based ink on recycled paper, as well as biodegradable, recycled paperboard tubes. The unit does not generate harmful exhaust gases and handles all residential and commercial smoke testing applications. Smoke tests take minutes to perform and see immediate results. The unit comes with an 8-foot, industrial-grade flex hose, weighs 8 pounds and requires no maintenance. 800-945-8378;

Vivax-Metrotech vLoc3-Cam

The vLoc3-Cam sonde locator from Vivax-Metrotech includes advanced filtering and omnidirectional antenna technology that makes sonde locating fast, easy and accurate. The bright full-color graphic display directs the user to the sonde with directional arrows. When on top of the sonde, confirmation is provided with a large sonde icon and depth reading. The Pushrod Trace mode shows a second display for tracing the path of the pushrod deployed in the pipe or tracing utilities with an optional portable transmitter. Passive locate modes of Power and Radio will detect the presence of live power lines, CATV, telephone and metallic pipes that radiate 60 Hz from nearby or overhead power lines. 800-446-3392;

Pressure Washer and Sprayer

Cam Spray MCB3040

The MCB3040 skid-mount hot water pressure washer from Cam Spray is designed to be moved easily from truck to van to trailer. It offers 4 gpm at 3,000 psi from a Honda GX390 industrial gas engine and triplex plunger pump with ceramic plungers and stainless steel valves. It is equipped with low-pressure chemical injection and is protected by an unloader valve and secondary pressure pop off. The burner system includes a rust-free fuel tank, schedule 80 coil with stainless steel wrap, is controlled by an adjustable thermostat and temperature limit switch for a maximum temperature of 195 degrees F. The frame is industrial-coated 2-inch tubing and comes equipped with a wand/hose rack. A heavy-duty trigger gun with a dual wand with side handle valve allows the user to switch from high pressure cleaning to detergent application and is equipped with quick change 0-,15-, 25- and 40-degree nozzles. 800-648-5011;


TUF-TITE tank risers

Tank risers from TUF-TITE have internal supports or ledges to reinforce internal plastic safety lids. The ledges will strengthen the company’s plastic internal safety lids or a variety of internal safety devices made by others, such as concrete, fiberglass or rope netting. The riser lids come with the necessary mounting hardware, including safety screws. 800-382-7009;

Septic System Bacteria

Bionetix International Eco-Sept

Eco-Sept pouches from Bionetix International contain pink, granular powder with a high concentration of beneficial bacteria (28 billion per pouch), enzymes, biological nutrients and stimulants designed to improve the microbial action of a septic system. When added to a septic tank, they reduce the frequency of pumping by degrading paper, grease, vegetable waste and other organic wastes quickly, according to the manufacturer. This helps keep sewer lines open, prevents drain blockage and backups, extends life of leachfield lines and reduces foul odors, the maker says. It is safe to use and will not damage pipes or fittings. It comes in 1-ounce water-soluble pouches, 400 per pail. For 500- to 800-gallon tanks, the initial dose is one pouch per day for four days, followed by a one-pouch-per-month maintenance dose. For tanks of 1,000 to 2,500 gallons, the initial dose is two pouches per day for four days with a maintenance dose of two pouches per month. 514-457-2914;

Cape Cod Biochemical CCLS

CCLS from Cape Cod Biochemical was originally formulated for municipal waste treatment facilities, and the technology has been miniaturized for onsite septic systems. According to the manufacturer, it provides the same primary treatment required by treatment plants including BOD and COD removal, solids settling, solids digestion and odor control. 800-343-8007;

Century Chemical Bio-Tab 

Bio-Tab from Century Chemical sinks to the bottom of a septic tank where buildup problems begin. Its time-release technology is designed to gradually dissolve and create a growing area of activity at the bottom of the tank. There, self-reproducing bacteria and enzymes quickly grow as they digest and liquefy the organic waste. The tablet establishes itself by working from the inside out. Regular use, combined with routine pumping, is designed to help maintain a septic system in good working condition while also helping maintain the proper level of bacterial action and reducing odors and gases. 800-348-3505;

Ecological Laboratories PRO-PUMP/HC

PRO-PUMP/HC liquid live bacteria from Ecological Laboratories are a blend of microorganisms selected for broad-spectrum application in industrial and wastewater treatment. It contains over 30 strains of bacteria to resolve problems that occur in septic systems. Its performance results in the rapid breakdown and removal of fats, oils and greases that build up in septic tanks and absorption fields, according to the maker. It is a consortium of vegetative non-spore-forming bacteria formulated to exhibit exceptional performance in low-oxygen facultative anaerobic environments. Regular treatment can help reduce surface solids, bottom solids and odor. 800-326-7867;

J&J Portable Sanitation Products NuTank

NuTank septic system treatment from J&J Portable Sanitation Products is designed to replenish the enzymes in a septic tank. With high concentrations of billions of specific bacteria, it is engineered to break down solids, scum and sludge for a healthier septic system. Monthly usage can help reduce the potential for backup and costly repairs such as drainfield damage, according to the maker. It can help boost the progression of bacterial decomposition to help keep the septic tank and drainfield functioning, even battling harsh detergents and antibacterial products. Once a month, toss one dissolving packet into a drain or toilet and wash or flush down. It is environmentally friendly and safe for all plumbing. It comes prepackaged in 12 packets per jar and 12 jars per case. Company contact information can be added to each jar. 800-345-3303;

Lenzyme enzyme-bacteria product

Lenzyme is an enzyme-bacteria product used as a septic biological maintainer, drain cleaner and sewage treating agent in the home and in industrial, commercial and municipal installations. It can be packaged in the existing brand name or private labeled. It may also be used in formulations designed for a given condition or application.  Various formulas have been developed for use in drains, septic tanks and cesspools, and for industrial and commercial application. It is approved by the USDA for use in sewage and/or drainlines of official establishments operating under the federal meat, poultry and egg products inspection program and is only sold to licensed contractors. 800-223-3083;

Surco Portable Sanitation Products Enz-O-Matic

The Enz-O-Matic biological organic waste degrader and odor eliminator from Surco Portable Sanitation Products includes a high concentration of non-pathogenic, live bacteria cultures designed to rapidly degrade organic wastes with a blend of surfactants and odor counteractant fragrance. It is nonpolluting, contains no acids or toxins, and is certified Salmonella-free. It contains over 200 billion live bacteria cultures per gallon, according to the manufacturer. The bacteria count doubles every 20 to 30 minutes to provide continuous enzyme production. Enzymes digest and liquefy grease, blood, urine, vomit, feces, sewage and other organic substances, neutralizing odors on contact. It can be used for drainlines, septic tanks and septic spills. 412-789-8683;

Walex Products Bio-Active Septic Tank Treatment

Bio-Active Septic Tank Treatment from Walex Products can help reduce solids and restore the population of worker bacteria and enzymes, helping keep septic systems healthy between recommended tank pumping, according to the maker. Monthly application involves flushing one packet down the toilet. It is safe for all plumbing and helps prevent backups and dissolves solids. Each bag contains a one-year supply. 800-338-3155;

Septic System Chemicals

Arcan Enterprises Septic-Scrub

Septic-Scrub chemical additive from Arcan Enterprises is designed to help remove sludge that builds up and sticks to the stone in a drainfield, pit or sand mound to rejuvenate the drainfield. According to the maker, it works in the first 24 hours after application. It can serve as part of a maintenance program. It works with all types of systems, is safe to handle and is environmentally friendly. 888-352-7226;


RootX is designed to reduce the need for mechanical root control. Every component of a septic system can be treated with the chemical without the risk of machine failure or pipe damage to fight root intrusion. The mainline can be treated easily and effectively from a toilet or clean-out. Roots often penetrate tank, lid and riser seams, as well as baffle entries and exits. The chemical can be applied to the drainfield through a clean-out, distribution box or pressure system with special instructions. 800-844-4974;

Septic Tank - Poly, Fiberglass, Concrete

Jet Inc. J-500-800PLT

The J-500-800PLT plastic tank from Jet Inc. offers a lightweight alternative to concrete J-1500 Series BAT Media Plants. Treatment capacity is variable from 500 to 800 gpd. They are rotational molded using lightweight polyethylene for a seamless tank with maximum strength and durability. They are easy to transport and install in difficult site conditions. 800-321-6960;

Septic Tank Agitator

Crust Busters agitator

The handheld power agitator from Crust Busters has an 80-inch shaft and two- or three-blade propeller designed to mix a 1,000-gallon septic tank in five minutes. Options include 2-, 4-, 6- and 9-foot extensions and a short three-blade shaft that adapts to the two-blade unit. 763-878-2296;

UV Disinfection Equipment

SALCOR 3G UV Wastewater Disinfection Unit

The 3G UV Wastewater Disinfection Unit from SALCOR is used for residential, commercial and municipal applications, and it is UL-certified NEMA 6P flood-proof and NSF/Washington State Protocol six-month tested (with 21 upstream treatment systems). It inactivates bacteria/virus pathogens, including superbugs. Rated at 9,000-gpd gravity flow, it is meant as a reliable building block for large water recovery/reuse systems. When installed in 12-unit parallel/series arrays with ABS pipe fittings, systems can disinfect more than 100,000 gpd. Gravity flow equalizes without distribution boxes. Each unit has a foul-resistant Teflon lamp covering, two-year long-life lamp with efficient installation, minimal annual maintenance and energy use of less than 40 watts. 760-731-0745;   


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.