FLO-CORP announces the release of the Guardian 2000, a wireless monitor that transmits data using cell towers and/or satellites, along with pinpoint location of the device through a GPS satellite chip. Cellphones, satellite phones and GPS navigation systems are excellent examples of the technologies in use. FLO-CORP has packaged the benefits of these wireless communications with a Web interface that makes process conditions readily available from any computer, tablet or smartphone. This machine-to-machine (M2M) functionality is changing industries for the better by offering superior features at a lower cost. 

Traditional remote process monitoring relies on wired infrastructure or radio. In some cases, tapping into an existing network or programmable logic controller (PLC) is quite simple. When tanks, open channels, pipelines or other monitoring applications are located at the same physical location as the company or municipality, the cost of wiring is typically low. 

The Guardian 2000 is aimed at a different target, addressing monitoring applications that are situated away from existing infrastructure. This segment, typically dominated by radio transmitters, can be covered much more economically and reliably with new wireless monitoring technology. 

In a typical remote monitoring setup, the Guardian 2000 monitors by waking up at set intervals, powering up the connected measurement device if applicable (flowmeter or level transmitter), and checking the process condition. If no trigger point is met, the Guardian 2000 powers down the connected device and then powers down itself. The Guardian 2000 wakes up to transmit data to the Monitor My Guardian online interface as programmed, once a day for example. If while making a routine check the Guardian finds a process condition change, it can either wake itself more frequently to make additional checks or if an alarm point is met, it will send text and email alerts and report the findings on monitormyguardian.com. 

The tank truck industry benefits greatly from wireless monitoring. In addition to remotely reporting data, the Guardian 2000 reports the exact location of the tank truck. The information collected varies by application and can include monitoring flow into the tank truck during pickups, flow out of the truck during deliveries, tank level, product temperature, etc. The device can be wired to the truck for power to eliminate the need for battery replacement. The Guardian 2000 grants business owners and inventory managers faster access to accurate process information. This information enables them to make better business decisions in everything from theft prevention to route optimization and more. 

Recently the satellite version of our wireless monitoring system was installed alongside a Ranger 1000 Level Transmitter to offer overflow protection at a hydraulic fracturing site. Frac fluid, which consists mostly of water, is used in the process of horizontal drilling for trapped shale gas. After use, this fluid must be stored onsite until reused in the fracking process or shipped off site for processing. To accommodate this task, tanks are setup to temporarily store the fluid at the drilling site. Through the remote monitoring process described above, periodic checks are made and reported to ensure an overflow event does not occur. 

Process monitoring helps save money and time while aiding in protecting the environment. FLO-CORP’s Guardian 2000 Wireless Monitoring System has improved process monitoring by bringing technological advancements in cellular, satellite, and GPS communications to the M2M process instruments market. For more information, visit www.flo-corp.com.