Vacuum Pumps/Blowers - Moro USA PM80W Water Series

The liquid-cooled PM80W Water Series vacuum pump from Moro USA is a commercial-grade vacuum pump designed for industrial-duty applications. It has 29 psi positive pressure capability and can run at 24 inches Hg continuous (28 inches Hg max intermittent) with a flow rate of 417 cfm. The suggested tank size is 2,000 to 4,000 gallons. It has Kevlar vanes, visual inspection ports and a cantered rotor that creates higher efficiency. It has high-quality Viton oil seals rather than typical Buna elastomers. It also has direct-feed oil-injected lubrication and sealed or oil-injected bearings that eliminate grease points. It includes an integrated check valve, changeover valve and automatic oiling system, which, along with low-speed rotation, help to extend pump life under rigorous conditions. It is also available in right-angle and engine-drive packages. 800/383-6304; www.morousa.com.
 



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.