SJE panel-mounting post, accessories kit

The panel mounting post and three accessory kits from SJE-Rhombus are designed to improve control panel installations for contractors. The polyethylene post can accommodate control panel enclosures with a minimum depth of 6 inches and overall dimensions of 14 by 12 by 6 inches. The kit includes four stainless steel mounting bolts with gaskets and drilling template. The post can be mounted into the ground or over a 4- by 4-inch post or conduit. The riser mounting kit includes 2-inch hub assembly, 2- by 6-inch PVC pipe, connecting hardware and conduit. The simplex and duplex kits provide weatherproof installation. 888/342-5753; www.sjerhombus.com.

RIDGID laser distance meter

The micro LM-400 Advanced Laser Distance Meter from RIDGID can read distances up to 229 feet. Features include backlit, four-line display screen, inclination angle measurement system for indirect measurements in hard-to-reach areas, advanced calculation that can instantly adjust units to inches, feet or meters and storage for saving up to 20 measurements at a time. The meter is IP 54 dustproof, splash proof and has an auto shut-off after three minutes of inactivity to prolong battery life. 800/769-7743; www.ridgid.com.

Franklin Electric submersible cistern pumps

C1 Series stainless steel submersible cistern pumps from Franklin Electric are designed for use in graywater/filtered effluent, with the ability to pass solids up to 1/8 inch in diameter. The pump has a 304 stainless steel motor and outer shell with engineered polymer hydraulics for corrosion resistance and abrasive handling. The pumps are available in flow ratings of 10, 20 and 30 gpm with a maximum shut-off pressure of 100 psi and 115- or 230-volt 1/2 hp motor. 260/824-2900; www.franklin-electric.com

Guardair extended-reach safety air gun

Lazer Series safety air guns from Guardair Corp. feature ergonomic contoured grips with comfort trigger in palm switch and pistol grip style – both available with aluminum extensions from 6 to 72 inches in length. The pneumatic guns feature all-metal construction, aluminum venturi nozzle and 1/4-inch FNPT inlet. 800/482-7324; www.guardaircorp.com.

Amthor hydraulic rear door

The CLAW from Amthor Inter-national is a series of hydraulic arms designed to open and close the rear door on vacuum trucks, eliminating the need for wing nuts on the top and sides. The latching system can be used on any code or non-code vacuum truck. 800/328-6633; www.amthorinternational.com.

Lowell ratcheting socket wrenches

The 50, 50QR and 150 series of ratcheting socket wrenches from Lowell Corp. are designed for tough construction and pipeline jobs. Series 50 cast-iron wrenches disassemble for cleaning and have a fully enclosed ratchet mechanism. The Series 150 wrenches, made from stamped steel, do not disassemble and have a partially enclosed ratchet mechanism. Sockets are available in square or hexagon shapes. 800/456-9355; www.lowellcorp.com.